Minimum requirement for release 10.0

[murraya]

hi, as before...

check the DVD and you should find an application called "PC installer". install that to a PC and the use it to serve the CPU 6 via ethernet.

load the software that is on the DVD onto a PC (they usually have DVD drives) and use the application to serve via ethernet (the CS has an ethernet port).

PS watch out for netbooks as they come without DVD drives.

[Dribbling-vole]

Hi Murraya.

I have bought a netbook as you said me, but it has no DVD drive.

what do I do now ? You can't be much Guru if it takes you this long to give me right answer .

[murraya]

your right, I never changed my status to Guru. someone at this site must have made a horible mistake.

[murraya]

good news DV. I have found a product at cisco that may help.
http://homesupport.cisco.com/en-us/supp ... S%20DP-558
looks like if you plug this into the LAN with the CPU6, load the DVD and press play you should be up and going in no time.