running netadmin command and set it out like this:
Code: Select all
(1)xa000000> netadmin
Warning: for a specific setup please use menu mode (netadmin -m).
Do you want to erase the existing setup (y/n default is 'n') ? y
Do you intend to use IP/X25 on your system (y/n default is 'n') ? n
Warning: the node name must be unique.
Enter node name (default is node000000) ?
Do you want to activate internal name resolver (y/n default is 'n') ?
Enter local CPU position (a or b) for duplicated configuration
or n for single CPU (default is 'n') ?
Ethernet interface setup
========================
CPU name (default is xa000000) ?
CPU address (default is 192.168.3.246) ?
Network mask (default is 255.255.255.0) ?
Default router setup
====================
Do you use an external gateway as default router (y/n default is n) ?
Please wait, working ...
The setup has been correctly achieved.
Security
========
Restricted access
=================
WARNING: For security reasons, you must be logged "root" to access to this menu.
There is no trusted host declared on your system !
There is no range of trusted hosts declared on your system !I dont have so much experience with OXE, and i cant understand what's the problem. I followed the instructions given to me in the Alcatel-University but it seems not to work
Can someone help me out?
