DHCP ON 6850

Post Reply
mramirezg

DHCP ON 6850

Post by mramirezg »

Hi, we have a OS6850, we need to know if the 6850 has an internal DHCP server for multiple VLAN´s, we need to give ip addresses to users by the mac address.
Regards,
Mauricio
one6f

Re: DHCP ON 6850

Post by one6f »

Hi,

since AOS Release 6.4.3 OmniSwitch supports an internal DHCP Server compliant with RFC 2131 based on Vital QIP 5.6.Consider the following when using the OmniSwitch Internal DHCP Server:
• Internal DHCP Server is supported only on the default VRF instance.
• Internal DHCP Server and DHCP Relay/Snooping are mutually exclusive; these features cannot run together in the default VRF instance.
• Only IPv4 is supported.
• Configuration on a per-VLAN basis is not supported.<---
• Configuring an IP interface is required.
• A maximum of 2K leases is recommended.
• If the dhcpd.conf file is edited, a restart of the DHCP Server (dhcp-server restart) is mandatory to reparse the modified configuration file.
• The larger the dhcpd.conf file size (file contains a lot of entries, such as with manual-dhcp), the more time it takes for the system to process the file.
• A DHCP server scope with Class A IP address subnets is not supported due to memory constraints.
• Configuring multiple DHCP server scopes for Class B IP address subnets will increase the amount of memory used. A single Class B scope reserves 2.3MB of memory.

For reference AOS 6.4.4.R01 OS6850/6850E Network Configuration Guide under
https://service.esd.alcatel-lucent.com/ ... witch_6800
Post Reply

Return to “OmniSwitch 6850 / 6850E”