6850 not Booting

[Vipin]

Dear All,

My network running with 1 OmniSwitch 9700, 10 OS6850P and 80 OS6224P

Recently one of my 6850 got stop working, will be gratful if some one can advice me with the below details.


R/gæÓk{æK~çzç¾×÷êË>ffçÆêÛâBB/fþkÿrëÅãÿþcfVênZÒ·âú'÷SrfîFÖkÒWggö\Ü?\}^ß|X=Yß¼ÞÛ]¿_}\~¼Ý<^\½~>[~>\Z[þ\Z]¾¿\|þ~¿^Þþ½ÞßX[>^}X\X]¾Z[~>¾]>[¿=ÿ^ß_ÝüataDrv call. 0 1 24 24 621 0 0

Adding 9946 symbols for standalone.


Boot parameters are:

'flash(1,0)cmm:default e=10.255.24.81:ff000000 h=192.168.10.1 g=10.255.24.181 cb=9600 cp=none cs=1 cw=8 cm=modemControlOff'


AOS kernel version: 6.1.5.479.R01
VxWorks (for Alcatel CMM MPC8248) version VxWorks5.5.1
KERNEL: WIND version 2.6
Made on Jun 11 2007, 20:23:45.
Copyright Wind River Systems, Inc., 1984-2006

CPU: Alcatel CMM MPC8248. Processor #0.
Memory Size: 0xfa00000 (250 MB). BSP version 1.2/1.

Portions of code copyrighted by Agranat Systems, Inc. All Rights reserved
Portions of code copyrighted by Alcatel-Lucent 1994-2007. All Rights reserved
Portions of code copyrighted by Apptitude, Inc. 1997-1999. All Rights reserved
Portions of code copyrighted by Free Software Foundation, Inc. 1989,1991. All rights reserved
Portions of code copyrighted by The OpenLDAP Foundation 1999-2000. All rights reserved
Portions of code copyrighted by Theodore T'so 1994,1995,1996,1997,1998,1999. All Rights reserved
Portions of code copyrighted by RSA Security, Inc. All Rights reserved
Portions of code copyrighted by Sun Microsystems, Inc. All Rights reserved
Portions of code copyrighted by Wind River Systems, Inc. All Rights reserved
Portions of code developed by the University of California, Berkeley.
Portions of code developed by the Carnegie-Mellon University.


0xf9ffde8 (tRootTask): cmm_random_init OK
0xefb24b0 (tWhirlpool): batch_entropy_process called
Target Name: vxTarget
User: target
Attaching network interface lo0... done.

The current date and time is:
Coordinated Universal Time (UTC): MON FEB 28 10:21:45 2011
Local time: MON FEB 28 10:21:45 2011 GMT

Starting dynamic software load from '/flash/certified/'...
Creating archive cache...

MON FEB 28 10:21:59 : SYSTEM (75) info message:
+++ Switch Logging device '/dev/console' enabled for output

MON FEB 28 10:21:59 : CSM-CHASSIS (103) info message:
+++ == CSM == === Chassis Supervision Starting Up ===
sysS

esf=0xdc3b4a0


MON FEB 28 10:21:59 : SYSTEM trap message:
Task 0xdc3b818 (tNiSup&Prb) priority 40. trapped

machine check
Exception next instruction address: 0x0010c4ac
Machine Status Register: 0x00043010
Condition Register: 0x22002022

2e33c0 vxTaskEntry +5c: nisup()
ca2820 nisup +10c: nisup_launcherRunInitRoutine()
ca0ec4 nisup_launcherRunInitRoutine +98: bcm56xx_init()
bed130 bcm56xx_init +54: bcm_init_moduleOps()
becce4 bcm_init_moduleOps +100: bcmMod_glob_config()
bed390 bcmMod_glob_config +9c: bcm_sysconf_probe()
be9aa0 bcm_sysconf_probe +5c: vxbde_create()
bb1780 vxbde_create +88: pci_device_iter()
b05f14 pci_device_iter +104: _setup()
bb1594 _setup +308: pci_config_getw()
b0d314 pci_config_getw +6c: pciConfigInLong()
1011d4 pciConfigInLong +fc: sysPciConfigRead()
10c530 sysPciConfigRead +dc: sysPciConfigRead()

r0 = 0 sp = dc3b560 r2 = 0 r3 = 0
r4 = 80008010 r5 = 0 r6 = 10 r7 = 4
r8 = dc3b580 r9 = 400000 r10 = dc3b4d3 r11 = 0
r12 = 0 r13 = 0 r14 = 0 r15 = 0
r16 = 0 r17 = 0 r18 = 0 r19 = 0
r20 = 0 r21 = dc3b610 r22 = dc3b5f0 r23 = eac533c
r24 = b010 r25 = dc3b5b0 r26 = ffffffff r27 = 10
r28 = 0 r29 = eac0000 r30 = dc3b580 r31 = 10
msr = 43010 lr = 10c530 ctr = 10c454 pc = 10c4ac
cr = 22002022 xer = 0

0x10c45c 9001001c stw r0,28(r1)
0x10c460 6889000c xori r9,r4,0xc
0x10c464 21690000 subfic r11,r9,0x0 # 0
0x10c468 7d2b4914 adde r9,r11,r9
0x10c46c 21630000 subfic r11,r3,0x0 # 0
0x10c470 7c0b1914 adde r0,r11,r3
0x10c474 93c10010 stw r30,16(r1)
0x10c478 7c0b4839 and. r11,r0,r9
0x10c47c 93e10014 stw r31,20(r1)
0x10c480 7d1e4378 or r30,r8,r8
0x10c484 7cdf3378 or r31,r6,r6
0x10c488 3800ffff li r0,0xffff # -1
0x10c48c 4082001c bc 0x4,2, 0x10c4a8 # 0x0010c4a8
0x10c490 2f870002 cmpi crf7,0,r7,0x2 # 2
0x10c494 419e00a8 bc 0xc,30, 0x10c53c # 0x0010c53c
0x10c498 419d0068 bc 0xc,29, 0x10c500 # 0x0010c500
0x10c49c 2f870001 cmpi crf7,0,r7,0x1 # 1
0x10c4a0 419e0024 bc 0xc,30, 0x10c4c4 # 0x0010c4c4
0x10c4a4 3800ffff li r0,0xffff # -1
0x10c4a8 7c030378 or r3,r0,r0
0x10c4ac 83c10010 lwz r30,0x10(r1) # 16
0x10c4b0 8001001c lwz r0,0x1c(r1) # 28
0x10c4b4 83e10014 lwz r31,0x14(r1) # 20
0x10c4b8 38210018 addi r1,r1,0x18 # 24
0x10c4bc 7c0803a6 mtspr LR,r0
0x10c4c0 4e800020 blr
0x10c4c4 4bff4721 bl 0x100be4 # pciConfigBdfPack
0x10c4c8 3d200040 lis r9,0x40 # 64
0x10c4cc 57e0063a rlwinm r0,r31,0,24,29
0x10c4d0 7c640378 or r4,r3,r0
tartWatchdog() Starting watchdog timer to INTERRUPT after 240 secs.

machine check
Exception next instruction address: 0x0010c4ac
Machine Status Register: 0x00043010
Condition Register: 0x22002022
Task: 0xdc3b818 "tNiSup&Prb"
+++ == CSM == CS excep handler: exception 512 in task 0xdc3b818

[Vipin]

Hi Benny,

Will you kindly please help me for this.

Regards,
Vipin

[benny]

Which AOS release are you running on this OS6850?

If the answer is 6.1.5.479.R01, as I expect, then you should upgrade to the latest 6.4.3.R01 Maintenance Release (6.4.3.717.R01 as of today) before you invest any time in debugging.

-b

[Vipin]

Hi Benny,

I got the latest firmware version, but please tell me how can i upgrade if the system is as per above.

even I am not able to enter Mini Boot.

Please help me.

Regards,
Vipin