Analog Trunks don´t hang up

[zivadrums]

Hi everybody,

I have an OXO PABX, my problem is some extensions make outgoing calls and 5 minute on the go cut the communication i already change some of the variables that i read in other topic about the busy tone detection.

viewtopic.php?f=273&t=12643&hilit=BTDMaxWOff

But now the operator phone get calls and have no answer, there is a lot of this calls.

I hope that you could help me.

Thanks in advance.

[fernan05]

hello
which version of release is your oxo?

regards

[zivadrums]

Thanks for answering,


i have the 710/061.001 version.


thanks in advance.

[lmartinez]

Hi, seem to me as a Busy tone detection problem. My advice it's try to capture the busy tone that is sent from your telco, best way it's using a PIMphony IP+ wireshark to get the media UPD packets. Then use a software like cool edit 2.0 or similar to get the real parameters of frequencies and time period, then configured that parameters on your OXO

Good Look,

Luis Martinez

[briandang]

Dear Luis,
can you help me how to detect busy tone buy IP Media and Wireshark?
or can you email to me at : chuong@omnicomm.com.sg
tks