soft phone

ybelal · Post by **ybelal** » 10 Aug 2010 12:29

Hi,
I already have Alcatel IP Hard phones working within a VOICE VLAN
together with the omni pcx enterprise 7.1 and the PCs in a DATA VLAN.
Now I need to install Softphones on PCs; and since these PCs are in
the Data Vlan subnet, my question is How do my Softphones get
working with the omnipcx which is in a separate Voice Vlan subnet?
How qos will be managed?

Your response will be appreciated.

Thanks

ccube · Post by **ccube** » 10 Aug 2010 22:04

Hello,

Alcatel had IPT Vlan client before on Version 3.x of the IPTouch Softphones which is no longer available for the latest versions. Please see attached TC for VLAN and QoS for IPTouch Softphones.

Konstantinos.E · Post by **Konstantinos.E** » 20 Aug 2010 07:49

did you fix the lanpbxbuild file?

ybelal · Post by **ybelal** » 20 Aug 2010 13:42

would you please kindly tell me how and what fix i have to make in lanpbxbuild file.

ybelal · Post by **ybelal** » 20 Aug 2010 13:48

would you please kindly tell me how and what fix i have to make in lanpbxbuild file and as i saw in the document that there is Alcatel-Lucent MUX Intermediate Miniport Driver to create virtual LAN, Where can i find Alcatel-Lucent MUX Intermediate Miniport Driver.Please.

Konstantinos.E · Post by **Konstantinos.E** » 20 Aug 2010 14:12

do u ping from your pc to the pbx?if yes

under mtcl run the command lanpbxbuild

the tool will guide you to fix the configuration.just put the ip of the cpu and the ip of tftp server. the most of the times the cpu address is the same as the tftp.

i hope it works...