New IP OmniVista management sserver

Kjetil · Post by **Kjetil** » 09 Jul 2010 08:15

Hi.

I've had to change the IP address of the server running Omnivista 2500 3.4.1GA, which had the result that it's not available anymore...

What can I do to fix this? Is it irrevocably gone?

Kind regards
Kjetil

cedric1 · Post by **cedric1** » 14 Jul 2010 14:55

there is a way to do it

send you tomorrow

cedric1 · Post by **cedric1** » 15 Jul 2010 07:06

For Windows :

Changing IP address of OmniVista Server:

Stop the OmniVista Server and OpenLDAP server for OmniVista services. Change the IP address of the machine and then follow below steps.

1)Using Notepad, Open the “properties.conf” file located under “c:\Program Files\Alcatel OmniVista 2500” and replace the old IP address with new IP.
2)Using Notepad, Open the “NetscLdapConfig.xml” located under “c:\Program Files\Alcatel OmniVista 2500\classes\com\alcatel\ov1\ldap\server\resource” and replace the old IP address with new IP.
3)Open the regedit window from “Start->Run” by typing “regedit”. Go to “My Computer->HKEY_LOCAL_MACHINE->SOFTWARE->ldapsvr”, You will see “Urls” option on your right side. Double-click on the “Urls” and modify IP addresses at both places under “Value data” field and click OK.
4)Start the OmniVista Server and OpenLDAP server for OmniVista services

Kjetil · Post by **Kjetil** » 06 Sep 2010 08:35

Thank you very much - this worked perfectly (but you already knew that, didn't you?).

Kind regards
/Kjetil

cedric1 · Post by **cedric1** » 06 Sep 2010 11:02

Hi

I know it was working. So thx for your good feedback

Cedric