error on standby CPU

t3 · Post by t3 » 13 Nov 2006 22:10

Hello,
Does anyone know about this error message? and what command to know the database on main & stby cpu are similar

Thanx

"CMIS err rcp EFD on stand-by CPU: appli P1 err P2"
"P1 : Number of the application transmitting the incident"
"P1 : Error code"
"EFD file badly copied on the stand-by CPU"
"File /DHS3data/mao/efd.dat isn't copied on the stand-by CPU"
"Verify the link or configuration Main Cpu - stand-by CPU";

Post by **frank** » 14 Nov 2006 02:37

If I were you, I would do a master copy , and copy database and deliveries

sadim · Post by **sadim** » 14 Nov 2006 04:41

This file contains the machines were to send the events (ex: 4760).
Concerning a cmd to check if the db in stand and main are differente, there is none, but you can check the incidents, since there are incidents specific for that. Any way i agree with Frank, you should make a mastercopy and after it, check the duplication.

t3 · Post by t3 » 14 Nov 2006 19:21

I did mastercopy last night but it failed.
"Sorry, the duplication operation has timed out.
You must check the incidents on the MAIN cpu"

14/11/06 19:38:53 001010M|--/--/-/---|=2:0275=ACCOUNTING: Appli ACC_DUPLICATION
: feature incident 18 3

wizzy · Post by **wizzy** » 15 Nov 2006 06:15

Do the mastercopy, connected on serial port. As I wrote sometime, I had the same issue because the HDD of the stand by CPU had bad sectors