phone number transmission over external call forwarding

[Alex-SE]

Have a good time folks!

I'm missing a nice feature with following constellation:
Alcatel OmniPCX 4400; R4.1.311.7
We have some internal virtual analog users (e.g. 110 ... ) which are immediately forwaded to an external home office or mobile number in each case...
If now the appropriate extension is called the home office user sees only his internal number from 4400 system.
How could I (or can I) configure it in such a way that when the customer calls, the home office user sees real caller ID and not the number of A4400 internal extension?

[iourid]

Try this, change NPD for external forward from -1 to let say 30

/System/Other system/Descend hierarchy/External signaling Parameters

+­Review/Modify: External Signaling Parameters­­­­­­­­­­­­­­­­­­­­­­­­­­­­+
| |
| Node Number (reserved) : 1 |
| Instance (reserved) : 1 |
| Instance (reserved) : 1 |
| System Option + NPD for external forward |
| |
| NPD for external forward : 30 |
| |
+­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­+

[Alex-SE]

Try this, change NPD for external forward from -1 to let say 30

/System/Other system/Descend hierarchy/External signaling Parameters

+­Review/Modify: External Signaling Parameters­­­­­­­­­­­­­­­­­­­­­­­­­­­­+
| |
| Node Number (reserved) : 1 |
| Instance (reserved) : 1 |
| Instance (reserved) : 1 |
| System Option + NPD for external forward |
| |
| NPD for external forward : 30 |
| |
+­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­+

1000 Thanks for the tip

it works
but only if the caller is a internal user too
otherwise home office telephone displays our main operator's ID...

I think, I'll let it be so...

[H-MAN]

You need the feature "clip no screening" from your telephone provider to send numbers which don't belong to your account.

[frank]

Also,

go under System / Other system parameters / External Signaling / NPD for external forward

but I am not sure this exists in 4.1

[Alex-SE]

You need the feature "clip no screening" from your telephone provider to send numbers which don't belong to your account.

I'll try to find out how we can activate this with virtual analog ports. thank you.

Also,

go under System / Other system parameters / External Signaling / NPD for external forward

but I am not sure this exists in 4.1

you could see above (posting from iourid), that works...
but still thanks