Bearer Capability / Calling_number

Post by **frank** » 08 Jun 2006 17:17

Hi all,

I have a small issue at one of my customers site, and I was wondering if someone could give me an information on this:

What's the difference when I make a call between those 2 lines ?

IE:[6c] CALLING_NUMBER (l=6) -> 00 81 Num : 6264
IE:[6c] CALLING_NUMBER (l=6) -> 01 81 Num : 6264

It looks like the one with 01 81 do not send the calling/called number to the destination..

Thanks

Post by **vad** » 08 Jun 2006 22:56

Numbering plan 00 - Unknown, 01 - ISDN/telephone numbering plan.
In outgoing TG you have NPD selector, in NPD you have Calling numbering plan identification (Unknown, ISDN Unknown ...).

Post by **frank** » 09 Jun 2006 08:27

Ok.. Those 2 tests I am showing right now are uring the same trunk...
The only difference, is that the one showing the number is a ROUTING NUMBER to the trunk , and the 2nd one is a prof. trunk seizure prefixe..