Try this quickly..
Create an ARS prefix. Manage the discriminator.
In your route, put the SIP trunk. In the command table, just put the insert command.
give it a shot ..
create a sip trunk to sip provider,but have some problem.
-
frank
- Alcatel Unleashed Certified Guru
- Posts: 3386
- Joined: 06 Jul 2004 00:18
- Location: New York
- Contact:
Re: create a sip trunk to sip provider,but have some problem.
Code Free Or Die
-
alcatelboy
- Member
- Posts: 146
- Joined: 27 Dec 2005 06:46
- Location: south of china
- Contact:
Re: create a sip trunk to sip provider,but have some problem.
asking a question:
would the sip trunk can working in the OXE+vmware? use the sip phone can dial out through the sip trunk?
reguards
would the sip trunk can working in the OXE+vmware? use the sip phone can dial out through the sip trunk?
reguards
AQPS ACFE ACSE
-
alcatelboy
- Member
- Posts: 146
- Joined: 27 Dec 2005 06:46
- Location: south of china
- Contact:
Re: create a sip trunk to sip provider,but have some problem.
using the ars prefix and command dial table mode ,the TDM phone can dial out ,such as UAIP phone can dial out through the sip ISP,but when i use the sip phone can't not dial out .why?
AQPS ACFE ACSE
-
tot3nkopf
- Alcatel Unleashed Certified Guru
- Posts: 4058
- Joined: 02 Feb 2006 10:41
- Location: Germany & Romania
- Contact:
Re: create a sip trunk to sip provider,but have some problem.
Different codecs? Do you gave compressors on your system?
