ARS Tracer

Are you having any trouble while you are configuring a 4400 on site ? Share it with us, maybe someone will have the solution !
Post Reply
m0e

ARS Tracer

Post by m0e »

Hi Guys,

I'm newbe at alcatel system, I need information about to trace the ARS, I hope this trace will inform the digit that I have been delete or insert, I'll try to lookars but this command just give me information about ars menu, I want to know the real time konversion digit that I've been modify.

Regards,
Top
User avatar
frank
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 3386
Joined: 06 Jul 2004 00:18
Location: New York
Contact:
Contact frank

Post by frank »

If it's ars with overlapping, I am not sure you can do anything until the number is send to the CO. If it's ARS without overlapping, you might be able to see digit by digit send to the CO, but then you can't delete.
Code Free Or Die
Top
m0e

Post by m0e »

ok frank, actually I just need to confirm the digit has deleted or inserted, if lookars can show the digit it would be great... I'll try it

Thanks Frank

:)
Top
User avatar
frank
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 3386
Joined: 06 Jul 2004 00:18
Location: New York
Contact:
Contact frank

Post by frank »

No, I am pretty sure you won't be able to see if digits are deleted or inserted. All you can see is what is being sent to the CO. If you do that, then you'll see if you have the good number or no.. Fair enough !
Code Free Or Die
Top
m0e

Post by m0e »

that's right frank, I'll try this today, lookars didn't show me anything, or maybe u know the comand for this.
Top
User avatar
frank
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 3386
Joined: 06 Jul 2004 00:18
Location: New York
Contact:
Contact frank

Post by frank »

No, lookars i is going to simulate a call, you won't see anything. If you want to see something, use t3 and make a real call..
Code Free Or Die
Top
User avatar
alex
Senior Member
Posts: 1498
Joined: 06 Jul 2004 07:27
Contact:
Contact alex

Post by alex »

frank wrote:No, lookars i is going to simulate a call, you won't see anything. If you want to see something, use t3 and make a real call..
Hi guys
If you really want to see all info about how ARS works and understand Frenglish :wink:

you can use mtracer with following setup
tuner km
tuner all=off
tuner clear-traces
trc i
tuner +at
actdbg ars=on
mtracer -a
You'll get hella lot of info sthg like this. In case of troubles it can help to find what's causing the problem
mtracer started ...
(006975:000274) ARS->is here idx_remp = 4 idx_emis = 0 idx_fin = 0
(006975:000275) ARS: Enter ini_ars premchif est mis a TRUE
(006975:000276) trad_d_call discrStatus.RefStatus.digitNbr=[255]
(006975:000277) numdialed[5] = 1
(006975:000278) ARS : Enter ars_demarnum with forwarded_neqph = -1, nummcdu = -1
(006975:000279) ARS : testars processing route list 15 idx_ars 0, zone 1
(006975:000280) ars_sauv_numcomp j = 1 digit = 9
(006975:000281) ars_sauv_numcomp j = 2 digit = 3
(006975:000282) ars_sauv_numcomp j = 3 digit = 10
(006975:000283) ars_sauv_numcomp j = 4 digit = 10
(006975:000284) ars_sauv_numcomp j = 5 digit = 1
(006975:000285) ars_sauv_numcomp j = 6 digit = 5
(006975:000286) ars_sauv_numcomp j = 7 digit = 6
(006975:000287) ars_sauv_numcomp j = 8 digit = 9
(006975:000288) ars_sauv_numcomp j = 9 digit = 10
(006975:000289) ars_sauv_numcomp j = 10 digit = 10
(006975:000290) ars_sauv_numcomp idx_remp = 10 idx_emis = 5, idx_fin = 10
(006975:000291) ars_sauv_numcomp idx_remp_numdialed = 10
(006975:000292) ARS demar_rln idx_remp = 10 idx_emis = 5 idx_fin = 10
(006975:000293) ARS : rln_process Route List 15
(006975:000294) ARS : Stop and Wait conditions set as follow :
(006975:000295) ARS : ==>> stopping points on primary routes = 0
(006975:000296) ARS : ==>> wait point enable = 1
(006975:000297) ARS : ==>> previous failcode = -2
(006975:000298) ARS ->poor_route_jump : on est riche donc on ne fait rien
(006975:000299) get_user_cos : dtyterm != JONCT cos : 0
(006975:000300) get_route_to_use in rln 15, sub_routes_list 1 idx_ars 1 return r
oute_to_use 1
(006975:000301) ARS : Enter does_current_route_fit_to_bearer
(006975:000302) dtyterm = POS_OP, POS_NUM, AUTPOS, ou RSVP
(006975:000303) TELEPHONE (ou inconnu ou default)
(006975:000304) ARS : Requested bearer is 0
(006975:000305) ( SPEECH = 0, DATA = 1, AUDIO = 3, UNDEFINED = 4
(006975:000306) SPEECH, ROUTE_QUALITY_SPEECH = 1
(006975:000307) ARS : ROUTE 1, route_to_use 1 stop_limit -1 wait_limit -1 user c
ost 0
(006975:000308) get_route_to_use in rln 15, sub_routes_list 1 idx_ars 1 return r
oute_to_use 1
(006975:000309) get_trunk_group_number_to_use in rln 983124, sub_routes_list 0 i
dx_ars 66047
(006975:000310) return TG 84
(006975:000311) ARS: route found !! rln ... 15, ROUTE ... 1 route_to_use ... 1,
trk grp ... 84
(006975:000312) rln_process set resultat = EXTERNAL_ROUTE
(006975:000313) ARS : rln_process -> result = 3
(006975:000314) ARS demar_rln : rln_process status is EXTERNAL_ROUTE
(006975:000315) ARS : Enter ars_set_numcomp_according_to_rln route : 1
(006975:000316) ARS : idx_remp : 10 idx_emis : 5 idx_fin : 10 number_of_digits_s
till_to_get : 0
(006975:000317) ARS: deleted the 0 first digit(s) stored in numcomp
(006975:000318) ARS: get digit nb 1 which is 1 from numcomp
(006975:000319) ARS: get digit nb 2 which is 5 from numcomp
(006975:000320) ARS: get digit nb 3 which is 6 from numcomp
(006975:000321) ARS: get digit nb 4 which is 9 from numcomp
(006975:000322) ARS: get digit nb 5 which is 10 from numcomp
(006975:000323) ARS: get digit nb 6 which is 10 from numcomp
(006975:000324) ARS: numcomp digit number 1 is 1
(006975:000325) ARS: numcomp digit number 2 is 5
(006975:000326) ARS: numcomp digit number 3 is 6
(006975:000327) ARS: numcomp digit number 4 is 9
(006975:000328) ARS: numcomp digit number 5 is 10
(006975:000329) ARS: numcomp digit number 6 is 10
(006975:000330) ARS: ars_set_numcomp_according_to_rln idx_emis = 1, idx_remp = 6
, idx_fin = 6
(006975:000331) get_route_to_use in rln 15, sub_routes_list 1 idx_ars 1 return r
oute_to_use 1
(006975:000332) ARS->ars_poor_route_data_check start
(006975:000333) ARS->ars_poor_route_data_check : rich or last route do nothing
(006975:000334) ARS->ars_poor_route_data_check end : check = 0
(006975:000335) Enter ars_failed with failure_reason = -3
(006975:000336) ARS ars_failed route list 15
(006975:000337) ARS : Enter ars_rest_numcomp
(006975:000338) ARS : Enter NEW ars_retreive_num_dialed
(006975:000339) ARS: digit 1 that was 9 has been restored from numdialed
(006975:000340) ARS: digit 2 that was 3 has been restored from numdialed
(006975:000341) ARS: digit 3 that was 10 has been restored from numdialed
(006975:000342) ARS: digit 4 that was 10 has been restored from numdialed
(006975:000343) ARS: digit 5 that was 1 has been restored from numdialed
(006975:000344) ARS: digit 6 that was 5 has been restored from numdialed
(006975:000345) ARS: digit 7 that was 6 has been restored from numdialed
(006975:000346) ARS: digit 8 that was 9 has been restored from numdialed
(006975:000347) ARS: digit 9 that was 10 has been restored from numdialed
(006975:000348) ARS: digit 10 that was 10 has been restored from numdialed
(006975:000349) ARS : ars_retreive_num_dialed 10 digits retreived
(006975:000350) ARS ars_rest_numcomp idx_remp = 10, idx_emis = 5, idx_fin = 10,
zone = 1
(006975:000351) ars_sauv_numcomp j = 1 digit = 9
(006975:000352) ars_sauv_numcomp j = 2 digit = 3
(006975:000353) ars_sauv_numcomp j = 3 digit = 10
(006975:000354) ars_sauv_numcomp j = 4 digit = 10
(006975:000355) ars_sauv_numcomp j = 5 digit = 1
(006975:000356) ars_sauv_numcomp j = 6 digit = 5
(006975:000357) ars_sauv_numcomp j = 7 digit = 6
(006975:000358) ars_sauv_numcomp j = 8 digit = 9
(006975:000359) ars_sauv_numcomp j = 9 digit = 10
(006975:000360) ars_sauv_numcomp j = 10 digit = 10
(006975:000361) ars_sauv_numcomp idx_remp = 10 idx_emis = 5, idx_fin = 10
(006975:000362) ars_sauv_numcomp idx_remp_numdialed = 10
(006975:000363) ARS ars_failed appel demar_rln route list 15
(006975:000364) ARS demar_rln idx_remp = 10 idx_emis = 5 idx_fin = 10
(006975:000365) ARS : rln_process Route List 15
(006975:000366) ARS : Stop and Wait conditions set as follow :
(006975:000367) ARS : ==>> stopping points on primary routes = 0
(006975:000368) ARS : ==>> wait point enable = 1
(006975:000369) ARS : ==>> previous failcode = -3
(006975:000370) ARS ->poor_route_jump : on est riche donc on ne fait rien
(006975:000371) get_user_cos : dtyterm != JONCT cos : 0
(006975:000372) get_route_to_use in rln 15, sub_routes_list 1 idx_ars 2 return r
oute_to_use 2
(006975:000373) ARS : Enter does_current_route_fit_to_bearer
(006975:000374) dtyterm = POS_OP, POS_NUM, AUTPOS, ou RSVP
(006975:000375) TELEPHONE (ou inconnu ou default)
(006975:000376) ARS : Requested bearer is 0
(006975:000377) ( SPEECH = 0, DATA = 1, AUDIO = 3, UNDEFINED = 4
(006975:000378) SPEECH, ROUTE_QUALITY_SPEECH = 1
(006975:000379) ARS : ROUTE 2, route_to_use 2 stop_limit -1 wait_limit -1 user c
ost 0
(006975:000380) get_route_to_use in rln 15, sub_routes_list 1 idx_ars 2 return r
oute_to_use 2
(006975:000381) get_trunk_group_number_to_use in rln 983124, sub_routes_list 0 i
dx_ars 66047
(006975:000382) return TG 250
(006975:000383) ARS: route found !! rln ... 15, ROUTE ... 2 route_to_use ... 2,
trk grp ... 250
(006975:000384) rln_process set resultat = EXTERNAL_ROUTE
(006975:000385) ARS : rln_process -> result = 3
(006975:000386) ARS demar_rln : rln_process status is EXTERNAL_ROUTE
(006975:000387) ARS : Enter ars_set_numcomp_according_to_rln route : 2
(006975:000388) ARS : idx_remp : 10 idx_emis : 5 idx_fin : 10 number_of_digits_s
till_to_get : 0
(006975:000389) ARS: deleted the 0 first digit(s) stored in numcomp
(006975:000390) ARS: get digit nb 1 which is 1 from numcomp
(006975:000391) ARS: get digit nb 2 which is 5 from numcomp
(006975:000392) ARS: get digit nb 3 which is 6 from numcomp
(006975:000393) ARS: get digit nb 4 which is 9 from numcomp
(006975:000394) ARS: get digit nb 5 which is 10 from numcomp
(006975:000395) ARS: get digit nb 6 which is 10 from numcomp
(006975:000396) ARS: numcomp digit number 1 is 1
(006975:000397) ARS: numcomp digit number 2 is 5
(006975:000398) ARS: numcomp digit number 3 is 6
(006975:000399) ARS: numcomp digit number 4 is 9
(006975:000400) ARS: numcomp digit number 5 is 10
(006975:000401) ARS: numcomp digit number 6 is 10
(006975:000402) ARS: ars_set_numcomp_according_to_rln idx_emis = 1, idx_remp = 6
, idx_fin = 6
(006975:000403) get_route_to_use in rln 15, sub_routes_list 1 idx_ars 2 return r
oute_to_use 2
(006975:000404) ARS->ars_poor_route_data_check start
(006975:000405) get_route_to_use in rln 15, sub_routes_list 1 idx_ars 3 return r
oute_to_use -1
(006975:000406) ARS->ars_poor_route_data_check : rich or last route do nothing
(006975:000407) ARS->ars_poor_route_data_check end : check = 0
(006975:000408) ARS demar_t2 route list 15
(006975:000409) get_route_to_use in rln 15, sub_routes_list 1 idx_ars 2 return r
oute_to_use 2
(006975:000410) get_route_to_use in rln 15, sub_routes_list 1 idx_ars 2 return r
oute_to_use 2
(006975:000411) get_vpnCostLimit in rln 15, sub_routes_list 1 idx_ars 2
(006975:000412) return vpnCostLimit 0
(006975:000413) ARS->transchif rln = 15 ; poor_route =0; ars_call = 1 remote_ser
ver=0
(006975:000414) ARS donnees_reseau ars_call=1 ; remote_ars_server =0
(006975:000415) ARS : Enter prise_q931 with ars_call=1, idx_adt=15 remp=6 fin=6
(006975:000416) ARS in fill_called_number_header
(006975:000417) ARS in Is_there_a_CMD_FORCE_MF_in_DCT adt - 15 idx - 0
(006976:000418) ARS : send_ml_appel_en_cours ars_call = 1, idx_adt = 15, emis_mf = 0
Top
m0e

Post by m0e »

Hi Guys..
first of all I would like to say..Happy New Year to all of u..
Thanks alot Alex for your information... I'' try it....
Top
Post Reply

Return to “ON SITE TROUBLES”