Problem with CS - call servers, both CS are in main status!?

[haroun]

looks like some thing wrong in xb011001 netadmin
ole and CPU positions:

Role of the CPU : MAIN

CPU position : 06 !!!!20

>>>>>>>CPU address : Not Declared????
compare the ps -edf in both cpu can help , or past the incidents when the cpu b is restarded
can you perform a double bascul?

[frank]

looks like something changed in your network.
I would redo the net admin configuration from scratch.
what happens if you have CPUA MAIN up and running, and from CPUB (phone application not running) you run the mastercopy command?

[acamup]

It is not possible to use the bascul command when the servers are not visible.


(1101)xa011001> twin

Fri Oct 18 13:17:21 CEST 2024


Usage : twin [Redundancy Cpu Enable (y/n)]

Role and CPU positions:

Role of the CPU : MAIN

CPU position : 06

CPU address : 172.22.26.2

Twin CPU position : UNKNOWN

Twin CPU address : UNKNOWN

Redundancy State:

Duplicated configuration : YES

Wished sig. transfer mode : C1 signalling channel

Transmission CPU-CPU : KO

Telephony redundancy : KO

monitel redundancy : KO

memloader redundancy : KO

All applications redundancy : KO

(1101)xa011001> role -b
MAIN stand-by CPU state : NOT READY
(1101)xa011001> bascul

Fri Oct 18 13:17:30 CEST 2024


The Stand-By CPU is absent or not initialized. Command Unavailable.

-------------------------------------------------------------------------------------------

(1101)xb011001> bascul

Fri Oct 18 13:11:13 CEST 2024


The Stand-By CPU is absent or not initialized. Command Unavailable.

[haroun]

cpu position couldn't be same in redundancy case
one in position 6 the otherone in position 20 (a and b)
cpu b :
CPU position : 06------should be 20

CPU address : Not Declared the netadmin is not token in consideration