6850-48 with very old firmware

[syned]

Hi folks,

I have an Omniswitch 6850-48 in private use only. It was a donation and I like to use it at home.

I cleared the configuration and I'm able to log in and did almost the basic configuration.
The firmware is very old.

I'm looking for firmware/Miniboot/Uboot updates but nowhere found. The 'netherland partner' doesnt present the binaries anymore and for upgrading the firmware, I search for some releases including 6.4.x Miniboot/Uboot etc.

Could someone help me with the needed binaries to upgrade to the last version?
greetings and thanks for your support.


-> show hardware info
CPU Type : Motorola MPC8248,
Flash Manufacturer : CF 64MB ,
Flash size : 65470464 bytes (62 MB),
RAM Manufacturer : Samsung,
RAM size : 268435456 bytes (256 MB),
NVRAM Battery OK ? : YES,
Uboot Version : 6.1.3.601.R01,
Miniboot Version : 6.1.3.601.R01,
Product ID Register : 41
Hardware Revision Register : 30
CPLD Revision Register : 19
XFP Module ID : 00

show microcode
Package Release Size Description
-----------------+---------------+--------+-----------------------------------
Kbase.img 6.3.1.871.R01 14716315 Alcatel Base Software
K2os.img 6.3.1.871.R01 1733068 Alcatel OS
Keni.img 6.3.1.871.R01 4896214 Alcatel NI software
Ksecu.img 6.3.1.871.R01 474897 Alcatel Security Management

[esxi_admin]

maybe, but i dont know witch was the lastest uboot version

[alunoob]

Hi, I hate to bring this up from the dead but I'm in a similar boat and have no other options. Looking to just use the 6850-p24x at home but cannot locate AOS images/files anywhere. I understand companies protecting their products, but this is a way out EOL device where the only logical use would be in a private/non-commercial setting. I don't need the latest available so if anyone has any working AOS files, please reach out? The switch seems to have been wiped of everything except MiniBoot. I'd greatly appreciate any help. Thank you.

Some details in case anyone is actually reading this. Thank you again.

AOS miniboot version 6.4.4.213.R01
VxWorks (for Alcatel CMM Motorola MPC8248) version VxWorks5.5.1
KERNEL: WIND version 2.6

Attempting to load from CERTIFIED directory...
Loading kernel from '/flash/certified/K2os.img'...
Cannot find component (alcatelNetworking_kernel.lnk) in package (/flash/certified/K2os.img)!
Cannot find component (kernel.lnk) in package) in package (/flash/certified/K2os.img)!
Unable to load kernel image from file '/flash/certified/K2os.img'.
Unable to boot from CERTIFIED software release.
[Miniboot]->USB Disaster Recovery Activated
sysUsbDisasterRecoveryTask: ERROR: /uflash not found

[Miniboot]->

[syned]

I'm not sure if you can look into /flash while you are in Miniboot. But look into /flash/working. If you find any .img files you could copy them via CLI to /flash/certified.

you can look for files https://support.alcadis.nl/support-per- ... nterprise/

maybe this thread could help: https://www.alcatelunleashed.com/viewtopic.php?t=4436