Alcatel Lucent IP touch 4018 reseting

[ehia]

we are using oxo R7. We have 2 IP phones and sad to know everytime i connected the IP phone it always appear on the screen considering i setting up already the IP and tftp and subnet. same configuration with other IP 4018 that working now except with the IP.

1/5 Powered by WindRiver
2/5 Network Set up
3/5 Config Download
4/5 BInary Downlad
getting load
same found new version
getting code
same found new version
getting data
5/5 connecting
reset please wait
then back to 1/5 so on and so for.

[enio.eltz]

Hi Ehia

Did you see if you have software keys to run e-reflexes?

Best regards

[TPI]

try to disable the reset for update parameter under the user (user > TCP/IP user). We have had a customer that had some issues with 4018 phones rebooting like this, appeared to be a bad batch from ALU.

[nperalta]

look the file

lanpbx.cfg

[khodgson]

We have a problem like this seemingly with phones that have been plugged in not being able to find a licence - was told to wait 20 minutes or so. Noob question: do the phones have ROM that clears itself after a certain time period?

[BigDaddy]

I was wondering if there is a way to program the phone to force answer another caller's phone. How does one initiate the intercom feature?

[morio]

its OXO right. are you using dhcp or static. if dhcp are you using the pbx dhcp or external? also you need to creat least one IP user