Setup:
Laptop is connected directly using ethernet cable to port 2/1 and console cable to the console port.
Code: Select all
-> show ip interface
Total 2 interfaces
Name IP Address Subnet Mask Status Forward Device
--------------------+---------------+---------------+------+-------+--------
Loopback 127.0.0.1 255.0.0.0 UP NO Loopback
vl99 182.168.90.100 255.255.0.0 UP YES vlan 99
-> show ip interface vl99
Interface Name = vl99
SNMP Interface Index = 13600001,
IP Address = 182.168.90.100,
Subnet Mask = 255.255.0.0,
Broadcast Address = 182.168.255.255,
Device = vlan 99,
Encapsulation = eth2,
Forwarding = enabled,
Administrative State = enabled,
Operational State = up,
Router MAC = 00:e0:b1:82:f8:ee,
Local Proxy ARP = disabled,
Maximum Transfer Unit = 1500,
Primary (config/actual) = no/yes
-> show vlan
stree mble
vlan type admin oper 1x1 flat auth ip ipx tag name
-----+------+------+------+------+------+----+-----+-----+-----+----------
1 std on off on on off off NA off VLAN 1
99 std on on on on off on NA on vl1
-> show vlan 99 port
port type status
--------+---------+--------------
2/1 default forwarding
-> show arp
Total 0 arp entries
Flags (P=Proxy, A=Authentication, V=VRRP)
IP Addr Hardware Addr Type Flags Port Interface Name
-----------------+-------------------+----------+-------+--------+-----------+----------
-> show mac-address-table
Legend: Mac Address: * = address not valid
Vlan Mac Address Type Protocol Operation Interface
------+-------------------+--------------+-----------+------------+-----------
99 74:78:27:15:0b:04 learned --- bridging 2/1
Total number of Valid MAC addresses above = 1