new to OmniPCX Enterprise PBX

[jahanzeb22]

Dear All,

i am new to OmniPCX Enterprise pbx. version 12.4.

how i can check all installed phones that are working and not working. basically looking for a inventory with all possible info to match with our purchase list of phones.

Thanks.

[vad]

What do you mean when say "working"? F.e. if analogue phone in services but during two weeks - 0 calls (from|to) - working or not?
Some command can give you information - listout, listerm, ippstat...

[jahanzeb22]

no talking about only ip phones.
all configured and connected IP phones
all configured but not connected/removed ip phones
with Ext and Mac address.

[haroun]

in this case ippstat

[jahanzeb22]

Thanks Haroun, command is really help full.

kindly let me know some other help full commands/guides/videos since i m going to handle this PBX system. i need to learn about it.

Thanks

[haroun]

hi
see system doc, and type help at prompt CLI or press the t*******n key
ps : be careful, do not type any command some of them can make u in troubles and should be run under R&D request , I highly recommend you to get a training there area bunch of them, starter, to pushed ones.