Hi!
I have a site with PCS which does not work properly.
The PCS is a CS2 board. The software version is R100.1 n2.514-30, the same running in the call server.
I used netadmin -m to configure the PCS, it seems OK, there are hosts file entries, and i can use ping, telnet, ftp to or from the PCS. I set the date / time, there is an empty database, autostart is set, TEL is running - cpu is in MAIN mode (but i suppose it has to be Passeive Call Server : Passive mode)
I used 8770 tool to configure the Passive Call Server entries, and IP -> IP Domain entries, everything is OK.
From my PC, i can use ping, ftp, telnet to the call server and i can use the same for the PCS, as well. There is no firewall in the system, or it is transparent.
But pcscopy fails. It sais "PCS Database Update => End NOK: Restore on PCS Failed.'"
Incvisu sais: 0433 PCS [ip address] Database update error 6 info 10.
The incinfo does not help, it tells me that there were "warnings during the command".
I have the manual, configured via the manual, but this PCS (the CS2 board) is in MAIN mode - not PCS - active/passive mode. Checked everything more than twice.
Where is the problem?
Any ideas are welcome.