Latest firmware for IP TOUCH 4028 (Extended Edition)

[vchrizz]

Hi,

we got our hands on some old iptouch 4028 phones before they would be trashed.
To make any use of them, we could setup the required tftpserver along with a fitting config.
So far the phones were working well, but after some days of usage we noticed some problems:
- after a longer conversation the phone gets unregistered and loses connection until rebooted.
- sometimes does not ring if a caller is calling.
- reboots about every 30~90min while idle (there are no network problems while they reboot).

we checked which firmware, it was 2.01.10
so we tried to find some other version and could find version 2.12.20
we are still testing but would like to know which version is the latest available for these phones?
are they even still supported or already EOL (end of life)?

thanks and cheers,
chris

[frank]

Last available binary for those sets is 4.33.40 I believe, available in the latest OXE Version.

[baloo1986]

Hello @frank is there still anyway to become "4.33.40" i dont have OXE?

[frank]

will email you

[baloo1986]

Thank you, but is the wrong format. My Phone wants these files:

bin4028G
bin4028G-header
datsip4028G
noesip4028G
noesip4028G-header
sipconfig.txt

i´m no sure is this a 4028 or 4028G? Becouse on the backside i read 4028

[nomadewolf]

Hi!


Can anyone provide latest firmware for 4018, 4028 and 4068?


Thanks!

[gordoniuc]

I'm looking for the same device's firmware I'm running a very old version (PRE-SIP) support.

I don't have OXE either, but I am using another SIP PBX offering, would appreciate a link to the files.