Virtual Chassis inconsistensy

Post Reply
slaskaridis
Member
Posts: 37
Joined: 21 Feb 2018 05:22

Virtual Chassis inconsistensy

Post by slaskaridis »

Hi
I have created a Virtual chsssis setup between 2 9900.
I followed the guid from Alcatel channet here: https://www.youtube.com/watch?v=85bppaxHWac
The 1st chassis is Master in cdm show virtual-chassis topology
the second is not slave, but Inconsist. in same command output

please advice
thank you
Top
slaskaridis
Member
Posts: 37
Joined: 21 Feb 2018 05:22

Re: Virtual Chassis inconsistensy

Post by slaskaridis »

hi again
after a reload from working no rollback timeout cmd on the slave switch, it is working fine.
it also corrected the write memory flash sync that was not able to run on the slave

thanks anyway
Top
Post Reply

Return to “OmniSwitch 9900”