Lanpower issue

[blackglobes]

Hello ,

one of our OS6450-P10 Release: 6.7.2.191.R04 GA seems too have some issue with lan power.
I have set the command "lanpower start 1" (also tried it with single ports).

i have connected an OAW-AP1221 but the AP dont get power.
I checkt the show lanpower command. So at status there is Undefined.
The On/Off is set to ON.

Other Informations showen:
Slot 1 Max Watts 120
0.0 Watts Actual Power Consumed
120.0 Watts Actual Power Remaining
120 Watts Total Power Budget Available
1 Power Supplies Available

Someone have an idea? Can i try something?


Regards Florian

[silvio]

Hi,
have you tested with other poe devices (phones, other APs)?
Try with a new release, check your miniboot.
In the knowledge base in the BP I have found this issue for your release in article 000041573. But there is no real solution/explanation for it. You can try something in the dshell. And if this isn't helpfull than you need to replace the switch....

regards
Silvio

[blackglobes]

Hi Silvio,
yes i have tested other devices also all ports.
I will Update aos and miniboot if possible.
Do you have some hints for the dshell commands?

Regards
Florian

[silvio]

If you have no access to the Business Portal (BP) than ask you supplier for the mentioned article. there you finde the commands.
best regards
Silvio