Hi all,
i having OXE system R12.3 running with Dual CPU-8.
i configured for system working with Dual CPU active and test bascul command OK .
But whenever i accessed the MAIN CPU, the command promt ONLY show the local name ( it not show Local MAIN name). and tried to test both CPUs as main role still got the same behaviour.
Any pro help me to solve this issue ?
thanks
Ethernet interface setup
========================
Netmask : 255.255.255.0
==============================================================================
| Machine type | Local interface | Name | Address |
==============================================================================
| local | Ethernet | cpu_a | 192.168.1.3 |
| local main | Ethernet | cpu_m | 192.168.1.4 |
| router | Ethernet | router | 192.168.1.254 |
==============================================================================
<return> to continue.
CPU redundancy setup
====================
Netmask : 255.255.255.0
==============================================================================
| Machine type | Local interface | Name | Address |
==============================================================================
| twin | Ethernet | cpu_b | 192.168.1.2 |
| twin main | Ethernet | cpu_m | 192.168.1.4 |
==============================================================================
<return> to continue.
(1)cpu_a> role -b
MAIN stand-by CPU state : ACTIVE
(1)cpu_a> twin
Usage : twin [Redundancy Cpu Enable (y/n)]
Role and CPU positions:
Role of the CPU : MAIN
CPU position : 20
CPU address : 192.168.1.2
Twin CPU position : 06
Twin CPU address : 192.168.1.3
Redundancy State:
Duplicated configuration : YES
Wished sig. transfer mode : B channel between IO2
Used sig. transfer mode : B channel between IO2
Transmission CPU-CPU : READY
Telephony redundancy : READY
monitel redundancy : READY
memloader redundancy : READY
All applications redundancy : READY
DUAL CPU8 not show Local Main name in Main active CPU !
-
- Member
- Posts: 246
- Joined: 09 Apr 2009 21:38
- Contact:
Re: DUAL CPU8 not show Local Main name in Main active CPU !
This is no issue at all, it will always show the name of the local CPU that is running in main mode.
if you do a ifconfig it will show the ip address of the main though
if you do a ifconfig it will show the ip address of the main though
"Be aware ask a stupid question without at least trying to find the answer first you may get a stupid answer....."
-
- Member
- Posts: 246
- Joined: 09 Apr 2009 21:38
- Contact:
Re: DUAL CPU8 not show Local Main name in Main active CPU !
i connect to main role ip address (192.168.1.4). the CPU name show here should be cpu_m
Last edited by doublevand981 on 04 Nov 2019 02:00, edited 1 time in total.
-
- Member
- Posts: 246
- Joined: 09 Apr 2009 21:38
- Contact:
Re: DUAL CPU8 not show Local Main name in Main active CPU !
doublevand981 wrote: ↑04 Nov 2019 01:46i connect to main role ip address (192.168.1.4). the CPU name show here should be cpu_m
Re: DUAL CPU8 not show Local Main name in Main active CPU !
No it will never show the main name never has and never will, it will still be in the host table
"Be aware ask a stupid question without at least trying to find the answer first you may get a stupid answer....."
Re: DUAL CPU8 not show Local Main name in Main active CPU !
yep it shows Always the local name
(1)pst_cpu20>
Ethernet interface setup
========================
Netmask : 255.255.255.192
==============================================================================
| Machine type | Local interface | Name | Address |
==============================================================================
| local | Ethernet | pst_cpu20 | 10.235.96.131 |
| local main | Ethernet | main | 10.235.96.130 |
| local | IP/X25 tunnel | x000001_tun | 172.30.253.1 |
CPU redundancy setup
====================
Netmask : 255.255.255.192
==============================================================================
| Machine type | Local interface | Name | Address |
==============================================================================
| local | Ethernet | pst_cpu6 | 10.235.96.129 |
| local main | Ethernet | main | 10.235.96.130 |
==============================================================================
(1)pst_cpu20>
Ethernet interface setup
========================
Netmask : 255.255.255.192
==============================================================================
| Machine type | Local interface | Name | Address |
==============================================================================
| local | Ethernet | pst_cpu20 | 10.235.96.131 |
| local main | Ethernet | main | 10.235.96.130 |
| local | IP/X25 tunnel | x000001_tun | 172.30.253.1 |
CPU redundancy setup
====================
Netmask : 255.255.255.192
==============================================================================
| Machine type | Local interface | Name | Address |
==============================================================================
| local | Ethernet | pst_cpu6 | 10.235.96.129 |
| local main | Ethernet | main | 10.235.96.130 |
==============================================================================
-
- Member
- Posts: 246
- Joined: 09 Apr 2009 21:38
- Contact:
Re: DUAL CPU8 not show Local Main name in Main active CPU !
haroun wrote: ↑05 Nov 2019 03:10 yep it shows Always the local name
(1)pst_cpu20>
Ethernet interface setup
========================
Netmask : 255.255.255.192
==============================================================================
| Machine type | Local interface | Name | Address |
==============================================================================
| local | Ethernet | pst_cpu20 | 10.235.96.131 |
| local main | Ethernet | main | 10.235.96.130 |
| local | IP/X25 tunnel | x000001_tun | 172.30.253.1 |
CPU redundancy setup
====================
Netmask : 255.255.255.192
==============================================================================
| Machine type | Local interface | Name | Address |
==============================================================================
| local | Ethernet | pst_cpu6 | 10.235.96.129 |
| local main | Ethernet | main | 10.235.96.130 |
==============================================================================
Did you check the Dual status ?
Telnet to 10.235.96.130 ip address. it should show name "main"
Re: DUAL CPU8 not show Local Main name in Main active CPU !
each time the local name is used instead of "main" wich is the norma behavour cuse like this we know wich cpu is the maindoublevand981 wrote: ↑05 Nov 2019 23:36haroun wrote: ↑05 Nov 2019 03:10 yep it shows Always the local name
(1)pst_cpu20>
Ethernet interface setup
========================
Netmask : 255.255.255.192
==============================================================================
| Machine type | Local interface | Name | Address |
==============================================================================
| local | Ethernet | pst_cpu20 | 10.235.96.131 |
| local main | Ethernet | main | 10.235.96.130 |
| local | IP/X25 tunnel | x000001_tun | 172.30.253.1 |
CPU redundancy setup
====================
Netmask : 255.255.255.192
==============================================================================
| Machine type | Local interface | Name | Address |
==============================================================================
| local | Ethernet | pst_cpu6 | 10.235.96.129 |
| local main | Ethernet | main | 10.235.96.130 |
==============================================================================
Did you check the Dual status ?
Telnet to 10.235.96.130 ip address. it should show name "main"
(1)pst_cpu20> role
MAIN
(1)pst_cpu20> twin
Wed Nov 6 08:36:18 CET 2019
Usage : twin [Redundancy Cpu Enable (y/n)]
Role and CPU positions:
Role of the CPU : MAIN
CPU position : 20
CPU address : 10.235.96.131
Twin CPU position : 06
Twin CPU address : 10.235.96.129
Redundancy State:
Duplicated configuration : YES
Wished sig. transfer mode : C1 signalling channel
Used sig. transfer mode : C1 signalling channel
Transmission CPU-CPU : READY
Telephony redundancy : READY
monitel redundancy : READY
memloader redundancy : READY
All applications redundancy : READY
bellow i performed a bascul
You do not have the required permissions to view the files attached to this post.