Our ISP uses 6250 for our p2p links. We then use ospf between our sites.
We can't figure, including our ISP why we are not able send our traffic as tagged so each time we put new p2p in place we end up setting our port connected to 6250 to send traffic untagged.
our kit sends traffic untagged (ospf p2p)--- UNI, CVLAN untagged 6250 --- ISP --- 6250 CVLAN untagged UNI --- our kit
I got some output from 6250, I'm not sure how much of a help this is
Code: Select all
customer_6250> show ethernet-service
Legend : * - ERP NNI
Service Name : RSvlan2966
SVLAN : 2966,
NNI(s) : 1/10
SAP Id : 10
UNI(s) : 1/1,
CVLAN(s) : untagged,
SAP Profile : RSSAP1
customer_6250> show mac-address-table
Legend: Mac Address: * = address not valid
Vlan Mac Address Type Protocol Operation Interface
------+-------------------+--------------+-----------+------------+-----------
2966 xx:xx:xx:xx:xx:a4 learned --- bridging 1/1
2966 xx:xx:xx:xx:xx:d1 learned --- bridging 1/1