I have some 6860's(didnt know where else to post(UPDATE THE FORUM!)
Anywho....I can't figure out for the life me of how to get these things to do Mobile VLAN ports. I do it all day long on 6450, 6850, 9702 but these have AOS8!
anyone?
6860 Mobile VLAN
-
- Member
- Posts: 25
- Joined: 13 Mar 2014 12:48
6860 Mobile VLAN
Network Engineer, Director
Re: 6860 Mobile VLAN
Hi,
I think you have to use unp edge-profiles to use the same things like with mobile vlan.
unfortunately I haven't also no experience with 6860.
regards
Silvio
I think you have to use unp edge-profiles to use the same things like with mobile vlan.
unfortunately I haven't also no experience with 6860.
regards
Silvio
-
- Member
- Posts: 25
- Joined: 13 Mar 2014 12:48
Re: 6860 Mobile VLAN
It should be the "same" as 6900, still no luck here.
Network Engineer, Director
Re: 6860 Mobile VLAN
Hi Matt,
Could you please post an example config in AOS R6 style as you'd need it on OS6860? It would be a lot easier for me to answer it that way ...
B
Could you please post an example config in AOS R6 style as you'd need it on OS6860? It would be a lot easier for me to answer it that way ...
B
Regards,
Benny
Benny
-
- Member
- Posts: 25
- Joined: 13 Mar 2014 12:48
Re: 6860 Mobile VLAN
vlan port mobile 2/40
vlan port mobile 2/41
vlan port mobile 2/42
vlan port mobile 2/43
vlan port mobile 2/44
vlan port mobile 2/45
vlan port mobile 2/46
vlan port mobile 2/47
vlan port mobile 2/48
vlan 1050 mac range 00:10:49:00:00:00 00:10:49:ff:ff:ff
vlan 1053 mac range 18:64:72:00:00:00 18:64:72:ff:ff:ff
vlan port mobile 2/41
vlan port mobile 2/42
vlan port mobile 2/43
vlan port mobile 2/44
vlan port mobile 2/45
vlan port mobile 2/46
vlan port mobile 2/47
vlan port mobile 2/48
vlan 1050 mac range 00:10:49:00:00:00 00:10:49:ff:ff:ff
vlan 1053 mac range 18:64:72:00:00:00 18:64:72:ff:ff:ff
Network Engineer, Director
Re: 6860 Mobile VLAN
Hi Matt,
Ok, let me introduce you to Access Guardian 2.0 ...
The good news:
- You'll need to adapt to a new CLI (that imho is better)
I encourage you to test this on a lab-switch before going in production as I don't have a OS6860 running right now ...
Select your edge ports (your list):
(Setting the port-type edge sets it role to something that could be authenticated.)
Create an edge-template, you can set many more options there - just have a look through them, very powerful:
Create two edge-profiles (you can choose any name, I just use your VLANs since I don't know your use for them):
(Note that you could also attach "qos-policy-list" to edge-profiles, delivering ACL and QOS capabilities)
Create your classification rules for MAC addresses and bind them to your edge-profile:
I'm planning to do some before & after configuration comparing AOS R6 to R7/R8, but I'm lacking the time to do that ..
Hope that helps, let me know if you have questions Matt.
B
Ok, let me introduce you to Access Guardian 2.0 ...
The good news:
- You can use port ranges
- You can write templates
- You can have port groups talk to different radius servers
- much more that doesn't fit here ..
- You'll need to adapt to a new CLI (that imho is better)
I encourage you to test this on a lab-switch before going in production as I don't have a OS6860 running right now ...
Select your edge ports (your list):
Code: Select all
AOS_R8-> unp port 2/1/40-48 port-type edge
Create an edge-template, you can set many more options there - just have a look through them, very powerful:
Code: Select all
AOS_R8-> unp edge-template "mobility-template"
AOS_R8-> unp edge-template "mobility-template" classification enable
AOS_R8-> unp port 2/1/40-48 edge-template "mobility-template"
Code: Select all
AOS_R8-> unp edge-profile "vlan-1050"
AOS_R8-> unp edge-profile "vlan-1053"
AOS_R8-> unp vlan-mapping edge-profile "vlan-1050" vlan 1050
AOS_R8-> unp vlan-mapping edge-profile "vlan-1053" vlan 1053
Create your classification rules for MAC addresses and bind them to your edge-profile:
Code: Select all
AOS_R8-> unp classification mac-address-range 00:10:49:00:00:00 00:10:49:ff:ff:ff edge-profile vlan-1050
AOS_R8-> unp classification mac-address-range 18:64:72:00:00:00 18:64:72:ff:ff:ff edge-profile vlan-1053
Hope that helps, let me know if you have questions Matt.
B
Regards,
Benny
Benny
-
- Member
- Posts: 25
- Joined: 13 Mar 2014 12:48
Re: 6860 Mobile VLAN
I finally followed this and made it work after adding the command
unp port 1/1/x-x port-type bridge
however when we plug a computer into the phone it doesn't utilize the default vlan of the port itself.
There is no port type EDGE. Only Bridge and Access
unp port 1/1/x-x port-type bridge
however when we plug a computer into the phone it doesn't utilize the default vlan of the port itself.
There is no port type EDGE. Only Bridge and Access
Network Engineer, Director
Re: 6860 Mobile VLAN
maybe because your answer is nearly 4 years after the post .... since 8.3.1 (now we have 8.5R2) there are some config changings. You will find in the userguides them.
best regards
Silvio
best regards
Silvio