How to disable codecs on OxE rel 10.1

[stefanc]

Hi !

Pherhaps a stupid question , but how can I disable all codecs except G711 (PCMA), I've tried to set ipdomains to no compression etc.. The system sends:

v=0
o=OXE 1543229753 1543229753 IN IP4 xxx.xxx.xxx.xxx
s=abs
c=IN IP4 xxx.xxx.xxx.xxx
t=0 0
m=audio 32002 RTP/AVP 8 18 4 97
a=sendrecv
a=rtpmap:8 PCMA/8000
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:4 G723/8000
a=rtpmap:97 telephone-event/8000
a=ptime:20
a=maxptime:40


Thanks in advance ...

/S

[fery_s]

in ip/ip domain set coding algorithm without compression also do this for your users in user/tsc ip

[stefanc]

Yepp , thanks for your fast reply.

I did that no compression what so ever in ip/ip domain(s), and the spec. user is a DECT.
question: Do I have to reset the pbx or anything else to get rid of the multiple codec offer.

[fery_s]

Yepp , thanks for your fast reply.

I did that no compression what so ever in ip/ip domain(s), and the spec. user is a DECT.
question: Do I have to reset the pbx or anything else to get rid of the multiple codec offer.

As I remember DECT phones work with G726 or G722 codec not G711.

[stefanc]

yes, but will not the INT-IP card make the codec translation. .... ?

[fery_s]

yes, but will not the INT-IP card make the codec translation. .... ?

actually I never check the DECT codec,but if I'm not mistaken when you use digital DECT it similar to make call to or from UA set so if set algorithm without compression it must used G711

[vad]

Main point:
- IP domain - extra domain codecs - with/without compression
- TG local parameters - IP compression type - default/G711
- System/Other system/Compression parameters - Multi algorithm for compression

[stefanc]

Thanks Vad, I did that, and also set the: 'system/Other System Parameters/Sip Parameters/Packetization times per codec' to False,

So now the telco is happy , again, at least for a while

Thanks all for your time and help.

/S