Hi All,
I need to do two activities on an OmniVista.
That's the first time I use it but I didn't find anything that could help me.
I need to:
- change date / time
- set allert email when there are warnings or superior events.
How to?
Thank you for your help and time!
Activities on OV 2500 4.2.2.R01
Re: Activities on OV 2500 4.2.2.R01
the time/date you have to configure at the console (ssh or vmware) - login as cliadmin. Better is to use the NTP server.
e-mail server in systemsettings (Administrator)
and in trap responder (notifications) you can create filters when a e-mail has to be sent....
use the online help.
regards
Silvio
e-mail server in systemsettings (Administrator)
and in trap responder (notifications) you can create filters when a e-mail has to be sent....
use the online help.
regards
Silvio
Re: Activities on OV 2500 4.2.2.R01
Hi Silvio,
thank you for your help.
I found how to do what I needed except that I didnt find a way to set the NTP server.
There's an other thing, I'm backupping 27 omniswtiches but 9 of them arent completing the task.
The error is "access denied" with SSH2, but I am sure that credentials are ok, because I usually log into these switches with those informations.
There's something I have to check?
It's strange because only a few of them cant backup.
Thank you
thank you for your help.
I found how to do what I needed except that I didnt find a way to set the NTP server.
There's an other thing, I'm backupping 27 omniswtiches but 9 of them arent completing the task.
The error is "access denied" with SSH2, but I am sure that credentials are ok, because I usually log into these switches with those informations.
There's something I have to check?
It's strange because only a few of them cant backup.
Thank you
You do not have the required permissions to view the files attached to this post.
-
- Member
- Posts: 1
- Joined: 06 Sep 2018 16:41
Re: Activities on OV 2500 4.2.2.R01
Check how the devices are discovered in Discovery --> Managed Devices. If they are with SSH, then check the switches with eror to allow SSH and change the SSH to telnet by editing the device configuration in Omnivista.
Re: Activities on OV 2500 4.2.2.R01
Thank you cordialguy, solved
Do you also remember a way to change ntp server?
Didnt find commands to change it by ssh connection :/
Do you also remember a way to change ntp server?
Didnt find commands to change it by ssh connection :/
Re: Activities on OV 2500 4.2.2.R01
the ntp server at the switches you can configure via cli-script. Here the commands for R6-Switches:
The ntp server at the server itself will be configured at the console of the server (login as cliadmin).
regards
Silvio
Code: Select all
ntp server x.x.x.x
ntp server unsynchronized
ntp client enable
regards
Silvio