Analog set ring tone

greatfaheem · Post by **greatfaheem** » 24 Apr 2018 04:18

After upgrading to R12.1 with CS3, few of the analog set ring with a strange sound on first ring and then beep on remaining rings.
What parameter should i change to make it work in normal way.

Post by **cavagnaro** » 24 Apr 2018 11:49

Analog is tied to boards, have you tried resetting them?

Enviado de meu E6633 usando Tapatalk

greatfaheem · Post by **greatfaheem** » 25 Apr 2018 02:24

Yes i did. I also tried rebooting the oxe but the results are the same.

Post by **cavagnaro** » 25 Apr 2018 07:29

Are these sets with the issue are on the same board or different ones?

Enviado de meu E6633 usando o Tapatalk

greatfaheem · Post by **greatfaheem** » 25 Apr 2018 08:18

They are on different boards.

Post by **cavagnaro** » 25 Apr 2018 08:20

This beep is on the called set or the caller?

Enviado de meu E6633 usando o Tapatalk

greatfaheem · Post by **greatfaheem** » 25 Apr 2018 08:22

Its on the called set. on first ring it ring with half ring but on second ring it just give beep.

Post by **vad** » 25 Apr 2018 23:36

Few ? Not all?
If you delete user and create again - problem solved or not?
Exist some relation between sets and behaviour (f.e. problem only with CLIP sets or hotel)?

Alcatel Unleashed

Analog set ring tone

Analog set ring tone

Re: Analog set ring tone

Re: Analog set ring tone

Re: Analog set ring tone

Re: Analog set ring tone

Re: Analog set ring tone

Re: Analog set ring tone

Re: Analog set ring tone