IP Desktop Softphone

Post Reply
esotronic
Member
Posts: 10
Joined: 27 Nov 2014 08:34

IP Desktop Softphone

Post by esotronic »

Hello,

I just switch from desktop phones to ip softphones for windows Version 8068 (11.0.95.0).
Phonecentral is Alcatel OmniPCX small with Firmware from mid 2017.
I use it on physikal pc's and virtual pc's. On both it keeps crashing about every 1 to 2 days
on each pc.

Not during the call. Only if I dial a new number or wanna get a conected call. Although having the
windows calculator on and try to call... on the virtual machines it beginns to stutter. When the Softphone
crashes, it makes some short crackling noise - then die.

Are there konown issues in this constelation? Are there other free softphone availible who do their job better?
User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 7014
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: IP Desktop Softphone

Post by cavagnaro »

Hi
What is the error message? Can you post a screenshot of your current phone?
Sounds like you have an OXO. It is more likely to be a Windows issue rather than software one.
Unless you are using sip phones you are attached to use only Alcatel ones.


Enviado de meu E6633 usando Tapatalk

Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
esotronic
Member
Posts: 10
Joined: 27 Nov 2014 08:34

Re: IP Desktop Softphone

Post by esotronic »

First, sorry for the late delay, things here are very rough.

Attached File of the softphone.

I can't find any logs. Not sure if the softphone is possible to write some log files?
You do not have the required permissions to view the files attached to this post.
solven
Member
Posts: 21
Joined: 10 Nov 2017 07:20
Location: Haugesund, Norway

Re: IP Desktop Softphone

Post by solven »

I don't know about the newer version, ours is 3.0.0.1 (sort of suprised it still runs after 10 years), but i find this logg file to be helpful when debugging
"C:\Program Files (x86)\Alcatel\IpDesktopSoftPhone\trace_pcmm.txt"
The idiot who somewhat could.
esotronic
Member
Posts: 10
Joined: 27 Nov 2014 08:34

Re: IP Desktop Softphone

Post by esotronic »

Sad, that in the newest version there is no trace_pcmm.txt and for my suprise that this software is over 10 years old :D
User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 7014
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: IP Desktop Softphone

Post by cavagnaro »

I remember you had to enable then in the config log, will give it a look

Enviado de meu E6633 usando Tapatalk

Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 7014
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: IP Desktop Softphone

Post by cavagnaro »

Yes, check the log4net file at installation folder, the path where logs are stored to is in there

Enviado de meu E6633 usando Tapatalk

Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 7014
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: IP Desktop Softphone

Post by cavagnaro »

Also give a look at pcmm.cfg
Not sure which sort of logs you want

Enviado de meu E6633 usando Tapatalk

Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
esotronic
Member
Posts: 10
Joined: 27 Nov 2014 08:34

Re: IP Desktop Softphone

Post by esotronic »

Can someone send me plz the newest version of the IP Phone, I can't find it on the net?!

In the software it is stated at
http://www.myproserv.com/updatesoftphon ... pSoftPhone
But I don't can create an account.

PM me if you want.
User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 7014
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: IP Desktop Softphone

Post by cavagnaro »

Post a screenshot of the error itself.
You can download new version from Alcatel Business partner portal
You need to be a BP of course

Enviado de meu E6633 usando Tapatalk

Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
Post Reply

Return to “Ip Desktop Softphone”