telnet 8028s

[dbruder]

Anyone knows how to telnet to the new 8028s-series?

I do a

Code: Select all

ippstat telnet d xxxx t 1440

like I did on the 8028/8038/8068 (where xxx is the extension number), but when I try to telnet to the corresponding ip address I get

telnet: Unable to connect to remote host: Connection refused

Thanks for any hints!

[tot3nkopf]

Is that phone in service?

[tgn]

tc2308ed01 chapter 17:

Code: Select all

Start by connecting to the phone ( through SSH login:admin )

regards...


--- back to basics... focus your eyes to the essential things... ---

[dbruder]

yes, the phone is in service

tgn, thank you very much! (I could have thought of ssh myself
it works with "ssh -2"

[tgn]

nice to know.
maybe you don't need the -2 if oxe has sshv2 activated.

regards...


--- back to basics... focus your eyes to the essential things... ---

[dbruder]

to be more precise, you have to use

Code: Select all

ssh -2 -l admin ip-address

password is *tx8000#

"ssh -2 admin@ip-address ip-address" doesn't work

[swinstu]

Worked for me as follows on OXE R12.3.1 with ssh enabled:

OXE>ippstat telnet d 65333 t 15 (## Or alternatively using command "ippstat" option 15 )
OXE>ssh -2 -l admin 10.88.57.66 (## ip address extracted via ippstat command option 2 or 3)

(password - *tx8000#)