Console port 2260

Post Reply
zepeki
Member
Posts: 6
Joined: 17 Aug 2021 03:53

Console port 2260

Post by zepeki »

Hello,

I create this topic today because since the arrival of the new range of Alcatel-Lucent Enterprise, the 2260, I can not access them via the console port as I usually do for the other switches of the range.
Usually I use an Rs232 DB9 cable to connect to the console port on the switches. I also tried with the adapter provided by Alcatel and by changing the speed, nothing works.
If you have the solution, thank you in advance.

Zepeki
silvio
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 1647
Joined: 01 Jul 2008 10:51
Location: Germany

Re: Console port 2260

Post by silvio »

For 2260/2360 you need the same serial adapter like for OAW (it is the same like for Cisco). Normaly the speed is set to 9.600 Baud. But I have seen that the speed where sometimes 115.200 Baud.
best regards
Silvio
Post Reply

Return to “OmniSwitch 2260 / 2360”