Hi everyone~
OmniSwitch 6860 does not have tcpdump command ?
I want check tcpdump but i cant find command.....
please help me...
How can i check tcpdump
Re: How can i check tcpdump
tcpdump command exists but it does not work in CLI mode.
go to su mode:
->su
SHASTA #-> tcpdump -i eth3
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth3, link-type EN10MB (Ethernet), capture size 262144 bytes
21:06:10.345138 STP 802.1w, Rapid STP, Flags [Learn, Forward, Agreement], bridge-id 8000.00:e0:b1:78:d9:8a.7429, length 43
Thanks,
Neethu
go to su mode:
->su
SHASTA #-> tcpdump -i eth3
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth3, link-type EN10MB (Ethernet), capture size 262144 bytes
21:06:10.345138 STP 802.1w, Rapid STP, Flags [Learn, Forward, Agreement], bridge-id 8000.00:e0:b1:78:d9:8a.7429, length 43
Thanks,
Neethu
Last edited by Neethu on 24 Mar 2020 10:59, edited 1 time in total.
Re: How can i check tcpdump
Thank you very mush!!!!!Neethu wrote: ↑24 Mar 2020 10:50 tcpdump command exists but it does not work in CLI mode.
go to su mode:
->su
SHASTA #-> tcpdump -i eth3
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth3, link-type EN10MB (Ethernet), capture size 262144 bytes
21:06:10.345138 STP 802.1w, Rapid STP, Flags [Learn, Forward, Agreement], bridge-id 8000.00:e0:b1:78:d9:8a.7429, length 43
Thanks,
Neethu
I really want to thank you for your help.
Have a good day~!