Pass QinQ between ports on OS6900

[jwpaxio]

Hi All,

I'm using an OS6900-X20 to aggregate customer sites. The traffic is already coming in QinQ from these sites - I want to trunk/aggregate this traffic out an NNI on the OS6900.

Is a simple ethernet service with two NNIs using a range of SVLAN tags the way to accomplish this? Normally I bring QinQ traffic together on an SAS-7210 and use MPLS to send the traffic on its way, but in this case I need to use the 6900.

I'm looking at something like (assuming a single SVLAN of 999):
Service Name : JW Test
SVLAN : 999
NNI(s) : 1/19-20
SAP Id : No SAPs configured

Thanks,

JW

[cedric1]

hello

As you only work with SVLAN and NNI interface, not UNI port.
-> you dont need to configure a service.

Ex :
SVLAN 999 come on port 1/1/1
SVLAN 998 come on port 1/1/2

Traffic aggregate out to port 1/1/20

Configure interface 1/1/20 as NNI and carry SVLAN 998 and 999

Cedric