LACP config secondary link not working

mdhussainvlr
Member
Posts: 133
Joined: 13 Nov 2017 01:42

Re: LACP config secondary link not working

Post by mdhussainvlr » 08 Oct 2018 15:04

Hi Silvio,

You mean to say that for stack of 2 switch we require PERF licenses to be on single switch and the uplinks 1/49 & 2/49 will get work ?




Sent from my iPhone using Tapatalk

silvio
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 1222
Joined: 01 Jul 2008 10:51
Location: Germany

Re: LACP config secondary link not working

Post by silvio » 08 Oct 2018 15:17

You need the PERF lic for all switches within the chassis where you need the 10G-Speed (at the front SFP+).
If you have the lic only in chassis 1 than only the last 2 ports of this chassis have the 10G (1/25 and 1/26 at 24-port switch, and 1/49 and 1/50 at 48port-switch). But if you need 10G-speed at both chassis (1/49 and 2/49) than you need the license also for both switches.

mdhussainvlr
Member
Posts: 133
Joined: 13 Nov 2017 01:42

Re: LACP config secondary link not working

Post by mdhussainvlr » 08 Oct 2018 23:42

Thanks Silvio


Sent from my iPhone using Tapatalk

Post Reply

Return to “OmniSwitch 6900”