Beginer questions for dect registration

[arvaikarcsi]

Help Me!

I am absolut beginer. I search everywhre a corre ser manual or a step by step description, how to register a new dect on the system but nothing nothing nothin. User manual no just the help but that not enough for me.

Please tell me what am i need to do:(

[cavagnaro]

Download and read docs maybe? It is available on the forum. Search is a good option too.

[arvaikarcsi]

Possible I am a donkey, but i find for this problem nothing for beginner.

[haroun]

yes is well documented in system doc
search for dectinst on command .
you should read

[haroun]

some command to tape and some keys combinaison to do in the mobile(dect)set
first of all you should creat dect user with the adequate set type(gap agap+ etc).
after that some command and some key combinaison (is on system doc)

[arvaikarcsi]

Ok but where i can found the system doc? You want to say me read the help? I have now just the help but that not to correct for a beginer.

[haroun]

hi sysytem doc are avalaibl for download from this forum under
viewtopic.php?f=322&t=11726
select one target to your Release
when you launch the cd rom load_doc and
go under system documentation
go down to omnimobility
go down to dect
go down to dect again

[arvaikarcsi]

Haroun this is a very good documentation thanks for this , but i have one problem this doc is omnipcx, and i have just omnivista 8770. You mean that omnipcx =omnivista?

[cavagnaro]

Omnivista is only a configuration interface for OmniPCX Enterprise aka OXE

[arvaikarcsi]

Omnivista is only a configuration interface for OmniPCX Enterprise aka OXE

Hmmm ok now its clean thx. A queston possible connect/register a new dect with just the omnivista or need the command line? We would like to try a panasonic dect to register. The cordless phone say to me search te base station but nothhing found.