Just a simple question from a Cisco guy.
Is there a way on a Omniswitch CLI to do the equivalent of what we can do using the pipe on Cisco IOS/ASA, HP/H3C Comware like "show whateveryouwant | include xxx" ?
No.. it is not and will never be available on that switches.
OS7 is only for 6900 and OS10k.
9700 is EoS if i remember right for 6850(E) there are Upgrades to 6.4.6, but they use the same syntax. If you have 6850 (without E) you will be "stuck" at 6.4.4
AFAIK on the newer switches (6900 & 10k) there is a linux running while on the oldones it's a vxworks.