second MDA not equipped in EVE-NG
Posted: 07 Jan 2019 14:26
Hi
I am trying to setup a second MDA on EVE-NG
Running:
# TiMOS-B-13.0.R4 both/i386 ALCATEL SR 7750 Copyright (c) 2000-2015 Alcatel-Lucent.
Startup commandline ( "gns3 rule" )
chassis=SR-7 card=iom3-xp mda/1=m5-1gb-sfp-b mda/2=m5-1gb-sfp-b
I have configured second MDA with no shutdown
#--------------------------------------------------
echo "Card Configuration"
#--------------------------------------------------
card 1
card-type iom3-xp-b
mda 1
mda-type m5-1gb-sfp-b
no shutdown
exit
mda 2
mda-type m5-1gb-sfp-b
no shutdown
exit
no shutdown
exit
But it does show as 'not equipped' :
*A:nokia1.lab#
*A:nokia1.lab# show mda
===============================================================================
MDA Summary
===============================================================================
Slot Mda Provisioned Type Admin Operational
Equipped Type (if different) State State
-------------------------------------------------------------------------------
1 1 m5-1gb-sfp-b up up
2 m5-1gb-sfp-b up provisioned
(not equipped)
===============================================================================
*A:nokia1.lab#
*A:nokia1.lab#
Ports stay in 'Ghost mode'
*A:nokia1.lab# show port
===============================================================================
Ports on Slot 1
===============================================================================
Port Admin Link Port Cfg Oper LAG/ Port Port Port C/QS/S/XFP/
Id State State MTU MTU Bndl Mode Encp Type MDIMDX
-------------------------------------------------------------------------------
1/1/1 Up Yes Up 8936 8936 - netw null xcme GIGE-LX 10KM
1/1/2 Up Yes Up 8936 8936 - netw null xcme GIGE-LX 10KM
1/1/3 Up Yes Up 8936 8936 - netw null xcme GIGE-LX 10KM
1/1/4 Up Yes Up 8936 8936 - netw null xcme GIGE-LX 10KM
1/1/5 Up Yes Up 8936 8936 - netw null xcme GIGE-LX 10KM
1/2/1 Down No Ghost 8936 8936 - netw null xcme
1/2/2 Down No Ghost 8936 8936 - netw null xcme
1/2/3 Down No Ghost 8936 8936 - netw null xcme
1/2/4 Down No Ghost 8936 8936 - netw null xcme
1/2/5 Down No Ghost 8936 8936 - netw null xcme
===============================================================================
Ports on Slot A
===============================================================================
Port Admin Link Port Cfg Oper LAG/ Port Port Port C/QS/S/XFP/
Id State State MTU MTU Bndl Mode Encp Type MDIMDX
-------------------------------------------------------------------------------
A/1 Up Yes Up 1514 1514 - netw null faste MDI
===============================================================================
Ports on Slot B
===============================================================================
Port Admin Link Port Cfg Oper LAG/ Port Port Port C/QS/S/XFP/
Id State State MTU MTU Bndl Mode Encp Type MDIMDX
-------------------------------------------------------------------------------
B/1 Up No Ghost 1514 1514 - netw null faste
===============================================================================
*A:nokia1.lab#
Anybody an idea on how to get the 2nd MDA up and running???
Thanks!
I am trying to setup a second MDA on EVE-NG
Running:
# TiMOS-B-13.0.R4 both/i386 ALCATEL SR 7750 Copyright (c) 2000-2015 Alcatel-Lucent.
Startup commandline ( "gns3 rule" )
chassis=SR-7 card=iom3-xp mda/1=m5-1gb-sfp-b mda/2=m5-1gb-sfp-b
I have configured second MDA with no shutdown
#--------------------------------------------------
echo "Card Configuration"
#--------------------------------------------------
card 1
card-type iom3-xp-b
mda 1
mda-type m5-1gb-sfp-b
no shutdown
exit
mda 2
mda-type m5-1gb-sfp-b
no shutdown
exit
no shutdown
exit
But it does show as 'not equipped' :
*A:nokia1.lab#
*A:nokia1.lab# show mda
===============================================================================
MDA Summary
===============================================================================
Slot Mda Provisioned Type Admin Operational
Equipped Type (if different) State State
-------------------------------------------------------------------------------
1 1 m5-1gb-sfp-b up up
2 m5-1gb-sfp-b up provisioned
(not equipped)
===============================================================================
*A:nokia1.lab#
*A:nokia1.lab#
Ports stay in 'Ghost mode'
*A:nokia1.lab# show port
===============================================================================
Ports on Slot 1
===============================================================================
Port Admin Link Port Cfg Oper LAG/ Port Port Port C/QS/S/XFP/
Id State State MTU MTU Bndl Mode Encp Type MDIMDX
-------------------------------------------------------------------------------
1/1/1 Up Yes Up 8936 8936 - netw null xcme GIGE-LX 10KM
1/1/2 Up Yes Up 8936 8936 - netw null xcme GIGE-LX 10KM
1/1/3 Up Yes Up 8936 8936 - netw null xcme GIGE-LX 10KM
1/1/4 Up Yes Up 8936 8936 - netw null xcme GIGE-LX 10KM
1/1/5 Up Yes Up 8936 8936 - netw null xcme GIGE-LX 10KM
1/2/1 Down No Ghost 8936 8936 - netw null xcme
1/2/2 Down No Ghost 8936 8936 - netw null xcme
1/2/3 Down No Ghost 8936 8936 - netw null xcme
1/2/4 Down No Ghost 8936 8936 - netw null xcme
1/2/5 Down No Ghost 8936 8936 - netw null xcme
===============================================================================
Ports on Slot A
===============================================================================
Port Admin Link Port Cfg Oper LAG/ Port Port Port C/QS/S/XFP/
Id State State MTU MTU Bndl Mode Encp Type MDIMDX
-------------------------------------------------------------------------------
A/1 Up Yes Up 1514 1514 - netw null faste MDI
===============================================================================
Ports on Slot B
===============================================================================
Port Admin Link Port Cfg Oper LAG/ Port Port Port C/QS/S/XFP/
Id State State MTU MTU Bndl Mode Encp Type MDIMDX
-------------------------------------------------------------------------------
B/1 Up No Ghost 1514 1514 - netw null faste
===============================================================================
*A:nokia1.lab#
Anybody an idea on how to get the 2nd MDA up and running???
Thanks!