HI
I have a problem with configuring the NTP setings on the 6850,6400 and 9700 swithces.
I have configured the following on teh swith.
F2-B-1-> show configuration snapshot ntp
! NTP :
ntp server 172.17.1.12 key 0 version 2 minpoll 4 prefer
ntp broadcast enable
ntp broadcast-delay 10
ntp client enable
The folling info i get fram the show command.
F2-B-1-> show ntp server status
IP address = 172.17.1.12,
Host mode = client,
Peer mode = server,
Prefer = yes,
Version = 2,
Key = 0,
Stratum = 3,
Minpoll = 4 (16 seconds),
Maxpoll = 10 (1024 seconds),
Delay = 0.016 seconds,
Offset = 0.766 seconds,
Dispersion = 0.468 seconds
Root distance = 0.190,
Precision = -6,
Reference IP = 172.17.1.1,
Status = configured : reachable : synchronization peer,
Uptime count = 13173186 seconds,
Reachability = 1f,
Unreachable count = 0,
Stats reset count = 13173099 seconds,
Packets sent = 5,
Packets received = 5,
Duplicate packets = 0,
Bogus origin = 0,
Bad authentication = 0,
Bad dispersion = 0,
Last Event = peer changed to reachable,
F2-B-1-> show ntp client
Current time: Thu, Aug 20 2009 10:00:14.500 (UTC),
Last NTP update: Thu, Aug 20 2009 10:00:07.750 (UTC),
Server reference: 172.17.1.12,
Client mode: enabled,
Broadcast client mode: enabled,
Broadcast delay (microseconds): 10,
Server qualification: synchronized
But the system time
F2-B-1-> system time
12:00:34 (CEST)
Could some one help me with this issue.
The NTP server is a windows 2003 server
kind regards
Paul van Drongelen