Post Reply
Posts: 2
Joined: 29 Dec 2014 22:52


Post by wisenawaz »

The call is not released after depositing a voice message into mailbox through analog trunk. The disconnection tone is also added with voice message. This is ok in case of if incoming call is made through PRI and also for extension to extension.
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 3692
Joined: 23 Sep 2004 06:47
Location: Russia

Re: VM-4635

Post by vad »

For analogue line - PBX usually not detect disconnect (just busy tone).
You can try to manage "busy tone detection" for TG. Or use external devices (detect busy tone and send "disconnect" to PBX)
Post Reply

Return to “Voicemail (46x5)”