PCS Configuration Procedure
Posted: 16 Mar 2015 05:22
Hi All,
This is my first time to setup PCS in VMWare for testing. I read the document and try to configurate it. But it look like a failure. Plesae correct me if my configuration is any wrong as below;
1. create 2 VMWare, OXE R9.0-h1.301-46 with license (332. PCS max number =1)
2. In Main CS IP = 192.168.30.101
PCS IP = 192.168.30.201
It is just internal network in my labs
3. Main CS
netadmin -m
What is your choice ? 2
Your system hasn't any site number.
Private IP addressing space: no
Restricted internet accesses: no
Accept ICMP redirect: no
Low dynamic ports range configuration : 10000 - 10499
There is no VLan configuration. No frame will be 802.1q-tagged.
node name : node000000
internal name resolver activated : no
Ethernet interface setup
========================
Netmask : 255.255.0.0
==============================================================================
| Machine type | Local interface | Name | Address |
==============================================================================
| local | Ethernet | xa000000 | 192.168.30.101 |
| router | Ethernet | router | 192.168.30.1 |
==============================================================================
> Passive Com Server
lqReview/Modify: Passive Com. Server
x x
x Node Number (reserved) : 1 x
x Instance (reserved) : 1 x
x x
x Automatic update type + None x
x Reset type + Reset by default x
x Database validity (in h) : 4 x
x x
> PCS Address
qReview/Modify: PCS Addresse
x x
x Node Number (reserved) : 1 x
x Instance (reserved) : 1 x
x IP Address : 192.168.30.201 x
x x
x IP Netmask : 255.255.0.0 x
x Name : PCS TEST x
x Update type + General parameters x
x Reset type + General parameters x
IP > IP Domain: 0
BackUp IP Address: 192.168.30.201
> System /other system Param. / system parameters> Overflow on Oos Extension: True
4. PCS
> empty database and then start the telephone service
netadmin -m
What is your choice ? 2
Your system hasn't any site number.
Private IP addressing space: no
Restricted internet accesses: no
Accept ICMP redirect: no
Low dynamic ports range configuration : 10000 - 10499
There is no VLan configuration. No frame will be 802.1q-tagged.
node name : node000000
internal name resolver activated : no
Ethernet interface setup
========================
Netmask : 255.255.0.0
==============================================================================
| Machine type | Local interface | Name | Address |
==============================================================================
| local | Ethernet | pcs | 192.168.30.201 |
| router | Ethernet | router | 192.168.30.1 |
==============================================================================
5. In Main CS
commnd: pcsview
+------------------------+------------------+-------------------+---------------
--+
| PCS Name | Address | State | Reset Type
|
|------------------------|------------------|-------------------|---------------
--|
| PCS TEST | 192.168.30.201 | UNDEF | Default (30s) |
+------------------------+------------------+-------------------+---------------
Ping Test is OK "From CS to PCS" and "PCS to CS"
Under the state is "UNDEF", i cannot use "pcscopy" to synchronization CS database.
Please advise which parameters is wrong or miss?
Thanks
This is my first time to setup PCS in VMWare for testing. I read the document and try to configurate it. But it look like a failure. Plesae correct me if my configuration is any wrong as below;
1. create 2 VMWare, OXE R9.0-h1.301-46 with license (332. PCS max number =1)
2. In Main CS IP = 192.168.30.101
PCS IP = 192.168.30.201
It is just internal network in my labs
3. Main CS
netadmin -m
What is your choice ? 2
Your system hasn't any site number.
Private IP addressing space: no
Restricted internet accesses: no
Accept ICMP redirect: no
Low dynamic ports range configuration : 10000 - 10499
There is no VLan configuration. No frame will be 802.1q-tagged.
node name : node000000
internal name resolver activated : no
Ethernet interface setup
========================
Netmask : 255.255.0.0
==============================================================================
| Machine type | Local interface | Name | Address |
==============================================================================
| local | Ethernet | xa000000 | 192.168.30.101 |
| router | Ethernet | router | 192.168.30.1 |
==============================================================================
> Passive Com Server
lqReview/Modify: Passive Com. Server
x x
x Node Number (reserved) : 1 x
x Instance (reserved) : 1 x
x x
x Automatic update type + None x
x Reset type + Reset by default x
x Database validity (in h) : 4 x
x x
> PCS Address
qReview/Modify: PCS Addresse
x x
x Node Number (reserved) : 1 x
x Instance (reserved) : 1 x
x IP Address : 192.168.30.201 x
x x
x IP Netmask : 255.255.0.0 x
x Name : PCS TEST x
x Update type + General parameters x
x Reset type + General parameters x
IP > IP Domain: 0
BackUp IP Address: 192.168.30.201
> System /other system Param. / system parameters> Overflow on Oos Extension: True
4. PCS
> empty database and then start the telephone service
netadmin -m
What is your choice ? 2
Your system hasn't any site number.
Private IP addressing space: no
Restricted internet accesses: no
Accept ICMP redirect: no
Low dynamic ports range configuration : 10000 - 10499
There is no VLan configuration. No frame will be 802.1q-tagged.
node name : node000000
internal name resolver activated : no
Ethernet interface setup
========================
Netmask : 255.255.0.0
==============================================================================
| Machine type | Local interface | Name | Address |
==============================================================================
| local | Ethernet | pcs | 192.168.30.201 |
| router | Ethernet | router | 192.168.30.1 |
==============================================================================
5. In Main CS
commnd: pcsview
+------------------------+------------------+-------------------+---------------
--+
| PCS Name | Address | State | Reset Type
|
|------------------------|------------------|-------------------|---------------
--|
| PCS TEST | 192.168.30.201 | UNDEF | Default (30s) |
+------------------------+------------------+-------------------+---------------
Ping Test is OK "From CS to PCS" and "PCS to CS"
Under the state is "UNDEF", i cannot use "pcscopy" to synchronization CS database.
Please advise which parameters is wrong or miss?
Thanks