Hello all,
I'm trying to install PCS card for redundancy on OXE. On PCS card, I configured IP, trusted host, created empty database and reboot it.
Then I configured via MGR the PCS on the CS Main. But when I try to use pcsopy on the CS Main to copy the database to the CS, copy fails. CS cards ask me several time the swinst password of PCS card (same error if I field it or not).
Looking at the trafic, SSH connection is established between both card. CS card creates the PCS database files but it seems to fail to send it.
Firmware used is the same on both cards (R10.1.1).
Do you have any idea on this issue ??
Thank you in advance
Yes PCS is already in host file of the CS card (as 47xx device).
PCS is running, TEL is started.
I have this message when pcscopy failed:
"End NOK: Restore on PCS failed"
Console message: "Database update: error 6 info -1"
I also try to deactivate SSH.
Comportment is a bit different (I don't have several prompt asking the swinst PCS pwd), and error is not exactly the same:
"End NOK: Copy on PCS failed"
Console message: "Database update: "error5 info 0"
I tried to stop the TEL, but it's still KO.
I think the problem is about the swinst password required when the PCS copy is launched. Process is not able to copy the database on PCS...
And PABX is connected to a closed network, unaccessible on the Internet...
I have upgrade to 8.01 and i cannot access administration page.
When i put the password i get the authentication failed message.
I can reset the password?
byronwak wrote: ↑14 May 2019 16:35
I have upgrade to 8.01 and i cannot access administration page.
When i put the password i get the authentication failed message.
I can reset the password?
What admin page?
"Be aware ask a stupid question without at least trying to find the answer first you may get a stupid answer....."