Page 1 of 1

How to Config Sip Extension for oxe 12.2 Step by step

Posted: 01 Jan 2019 23:17
by jatupornk5
Dear All

I need to add user for sip extension (x-Lite , Zoiper or other brand) use in alcatel oxe ,
I need to know how to config in oxe (Trunk,Sip Proxy,Sip Gateway)

I had config follow up Link "https://wiki.2n.cz/hip/inte/1.8/en/1-pb ... rprise-oxe"
But not success .

Please help to me , how to config all for sip extension.

Best regards,

Re: How to Config Sip Extension for oxe 12.2 Step by step

Posted: 07 Jan 2019 04:28
by mustafa.ahmad
Till what part u succeeded and what are the configurations that you have done.

Provide more info to assist further.

Re: How to Config Sip Extension for oxe 12.2 Step by step

Posted: 14 Jan 2019 14:17
by haroun
what's the default compression mode ? are those sip phone with regular licence or for demo ?
in demo mode u can't get G729 U should by or test them under sipdev

Re: How to Config Sip Extension for oxe 12.2 Step by step

Posted: 23 Jan 2019 22:50
by jatupornk5
haroun wrote: 14 Jan 2019 14:17 what's the default compression mode ? are those sip phone with regular licence or for demo ?
in demo mode u can't get G729 U should by or test them under sipdev
After i config Compression follow license , i can config sip extension have done.

Thank you everyone.