Alcatel Unleashed

Hi, Just wanting to see if anyone has got cisco 7961 phones working as seplos. I have tried sip 8.0.2sr1s and 8.3.1s software on the cisco phone and can make/receive calls as well as most features but cant get the message wait to work.
Has anyone got message wait light/envolope working on these phones with an OXE?
The OXE is 9.1 i1.605.12

Thanks in advance.

Some time ago I configured a 7941 just for fun. Worked in both SEPLOS and device mode ok. Hold was ok. OXE was 9.0 (don't remember the exact release).
SIP 8.3.1 was used

Thanks for that tot, I've no issue to get the phone to work with most features it's just the message wait that causes the issue for me. Normally after a sip phone registers I see a subscribe with the features it allows but with the Cisco I just get the register and no subscribe. I can't find anywhere how to make the phone subscribe which seems to be the issue.

I didn't had any issue. Maybe a config problem in Cisco xml?

Thanks, I alreay assumed that as I had not done cisco xml before that that was going to be the issue. many hours on web but no luck with it still,

PM me your private address and I will send you my config files.

Hi there, I have the same problem. Is possible you share me your config files. Regards.

Hi Murillo, I have currently associated Cisco 7821 69xx telephones to an oxe central version 12.2, it has been possible to register as a sip device and a sip extension, I have a problem telephone facilities do not work, such as call forwarding, transfer, conference, could you help me to solve these problems?
asullcahuaman@ebdperu.com

ALEM SULLCA
997601910