Alcatel Unleashed

Could someone guide me in order to configure OXE for local (internal) call to pilot ?
Thanks

You need to create a local hybird loop

hi, i have tried to create the local hybrid loop. in some systems it creates but the system which i really need i can create it but i see one link goes down. can some one advice me on this,,,

thanks..

Did you reboot the OXE after hybrid link creation?

hi pat yes, i did, but i always see that one of the links are down. no matter how much or how i try, always one hybrid is up while other is down,
i have used the same method in other sites and the loop works well.

Enough virtual trunks available in cfgUpdate?

hi

1 Stations : 763
3 Data terminals : 1000
4 Patients (hospital) - Fictive users : 10
5 Trunks : 636
8 Nodes in the network : 100
10 Shelves (migration excluded) : 100
11 1/2 com : 298
12 TS reserved for operators on INT/RT2 links : 4
13 Tables of R2 signalling translator : 1000
15 Data in R2 signalling translator : 1000
17 Abbreviated numbers : 4000
18 DECT Handsets : 250
19 Supervisable MCDU : 1500
20 Number of Sub-Networks : 16
21 Number of Network Set in Hunting Group : 300
22 Number of ARS route lists : 400
24 Number of areas (accounting duration) : 1000
25 Number of Charge Scales (accounting duration): 30
26 Supervisable Trunks / Trunk groups : 150
27 Number of Network Supervisor : 0
28 Number of PIN : 100
29 Number of CSTA buffer - Monitoring : 1200
30 Number of CSTA buffer - Pilot : 1200
31 Number of CSTA buffer - Service : 500
32 Number of CSTA buffer - RSI : 1200
33 Number of CSTA buffer - Associate/Reference : 1500
34 Number of x25 command abbreviated numbers : 100
35 Number of called filter : 500
36 Maximum Number Of Account Codes : 2000
38 Number of S0 users / bus on UA : 8
39 Number of entities /call routing group : 1001
40 Large number of fictive T0 (0/1) : 0
41 Number of Filtering Tables : 255
read in hardware.mao file :
51 Remanent size : 45980
52 Stand-alone : 0
53 Number of BLF : 0
54 Phone-book (x 2000) : 3
55 SBC : 2
56 4635X : 0
57 4630 : 0
58 4855 : 0
59 Hotel accesses : 0
60 ACD supervisor accesses : 0
61 Set display languages : 4
62 Maximum simultaneous casual conferences : 0
63 Large equipment capacity : 0

o modify (0 = Exit) :

this is the cfgUpdate ,, i cant not find it here.
regards
morio

hi again
132 IP-Trunk = 0
do you think i need ip trunk license on this and need to creat a h323 ip trunk group?

5 Trunks : 636

Compare to what you actually have in the system and increase in order to have enough trunks for the fictive trunks.
of the hybrid loopback links.
You do not need to create any IP link for hybrid loopback.

thanks, will try,,