Display the caller's number on an external telephone (installation telephone returned)

[Mick59]

Hello, when a telephone in the installation is forwarded to an external telephone, how do you display the caller's number on the external telephone? sorry for my english, thanks a lot for your help

[frank]

Under System / Other system parameters / External signaling parameters:
Try NPD For external forward (set to 0 instead of -1) and/or Redirecting number used (default False) -> Yes

[umer458]

Im presently with OXE-4400. Installation of new huawei USpace 1981 is underway, and its integration with our oxe 4400 through QSIG trunk as a slave exchange is being done. Calls, DID/DOD all OK, but having showing name issue, when Huawei call alcatel, just number is being shown on cli not name. for this sake call traces on trunk is being carried out, which shows for example name "Bilal" is read in traces, but not shown in CLI, just number e.g 44567. So how it can be done on alcatel side?

[frank]

Im presently with OXE-4400. Installation of new huawei USpace 1981 is underway, and its integration with our oxe 4400 through QSIG trunk as a slave exchange is being done. Calls, DID/DOD all OK, but having showing name issue, when Huawei call alcatel, just number is being shown on cli not name. for this sake call traces on trunk is being carried out, which shows for example name "Bilal" is read in traces, but not shown in CLI, just number e.g 44567. So how it can be done on alcatel side?

Classe of services / Phone features COS / Rights / Calling name display

It's in the documentation.
I really with people read it.

[umer458]

much thanks bro, its done......