hi .
my PBX is R11.0.1 and at the before , the package is use K152031, due to some reason. today we are upgrade to K152036a
when finish the upgrade. at the digital phone sets call out to outbound call . it show the calling number on the screen.
Also i have use the ARS function . when make the outbound call will add 1357 .
for example : i dial the 31551551. the system will dial out 135731551551. that is right.
BUT WHY the "1357"31551551 also show on the screen.
for the detail can see the attached file "after"
at the before is bland . how to turn off this function or do'n't show the 1357.
for the upgrade before detail , can see the attached file "before"
thanks for your helpful.
lqConsult/Modify: ARS Routeqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk
x x
x Node Number (reserved) : 1 x
x Instance (reserved) : 1 x
x Instance (reserved) : 1 x
x ARS Route list : 0 x
x Route : 1 x
x x
x Name : x
x Trunk Group Source + Route x
x Trunk Group : 1 x
x Nb.Digits To Be Removed : 0 x
x Digits To Add : 1357 <= how to this number not show on screen x
x Numbering Command Tabl.Id : 0 x
x VPN Cost Limit : 0 x
x Protocol Type + Dependant on Bundle Type x
x NPD identifier : 11 x
x Route Type + Public x
x ATM Address Id : -1 x
x Preempter + False x
x x
x Quality x
x x