Hi
Is it possible to have 5 languages in common hardaware? The profile is OXE R9.1/CS-2/GD-3. Can GA/GA3 be the solution? I know this can be a stupid question but...
Regards.
Voice guides in common harware
Voice guides in common harware
Enio Eltz Filho
ACFE OXE R12
ACFE OXO C R3
ACFE OXE R12
ACFE OXO C R3
-
- Alcatel Unleashed Certified Guru
- Posts: 1165
- Joined: 30 Aug 2006 13:43
- Location: Europe, Poland
Re: Voice guides in common harware
yeap, it's stiupid or lazy, as it is 4 minutes check:
-open actis, quote 5 languages for pbx with 20 UA users, how it does look like?
-go mgr, shelf, board, Voice Guide Index MG, you have 4 slots, now does there is a possiblity to select 2&3 and 4&5 or not?
-open actis, quote 5 languages for pbx with 20 UA users, how it does look like?
-go mgr, shelf, board, Voice Guide Index MG, you have 4 slots, now does there is a possiblity to select 2&3 and 4&5 or not?
Please note that at no time I will provide you with OXE/4400 nor AOS releases.
Note that it's our private time, that we spent to help you, so please don't expect complete solution for your problem.
You will need to do homework by your self.
Note that it's our private time, that we spent to help you, so please don't expect complete solution for your problem.
You will need to do homework by your self.
Re: Voice guides in common harware
Hi Krzysio D
Thanks for your fast reply. This was the information I needed:
Thanks for your fast reply. This was the information I needed:
With this GD3 reads hotadpcm.EN0.ES0, for example.there is a possiblity to select 2&3 and 4&5
Enio Eltz Filho
ACFE OXE R12
ACFE OXO C R3
ACFE OXE R12
ACFE OXO C R3
-
- Alcatel Unleashed Certified Guru
- Posts: 1165
- Joined: 30 Aug 2006 13:43
- Location: Europe, Poland
Re: Voice guides in common harware
hotadpcm is a hotel voice guide... you didn't mention that you have a hotel...
anywhay: Actis: 3 minutes, telnet to a pbx and use mgr: 1 minute.
anywhay: Actis: 3 minutes, telnet to a pbx and use mgr: 1 minute.
Please note that at no time I will provide you with OXE/4400 nor AOS releases.
Note that it's our private time, that we spent to help you, so please don't expect complete solution for your problem.
You will need to do homework by your self.
Note that it's our private time, that we spent to help you, so please don't expect complete solution for your problem.
You will need to do homework by your self.
Re: Voice guides in common harware
Hi
So, excuse me about the hotel. But yes, it's a system I will install in a hotel. Lock 5 and 10 are set to 1. After I created VG index MG as 2 & 3 and 4 & 5, GD3 has read the files from CS-2. Now I am testing them.
Best regards.
So, excuse me about the hotel. But yes, it's a system I will install in a hotel. Lock 5 and 10 are set to 1. After I created VG index MG as 2 & 3 and 4 & 5, GD3 has read the files from CS-2. Now I am testing them.
Best regards.
Enio Eltz Filho
ACFE OXE R12
ACFE OXO C R3
ACFE OXE R12
ACFE OXO C R3
Re: Voice guides in common harware
Hi
When I try to change the set language (administrative or room ), the languages from 2 to 5 aren't broadcasted, it just has busy tone when I call a busy set for example. When I don't use index 2&3 and 4&5 it works.Something I am missing...
Regards.
When I try to change the set language (administrative or room ), the languages from 2 to 5 aren't broadcasted, it just has busy tone when I call a busy set for example. When I don't use index 2&3 and 4&5 it works.Something I am missing...
Regards.
Enio Eltz Filho
ACFE OXE R12
ACFE OXO C R3
ACFE OXE R12
ACFE OXO C R3