CS-2 card bootup problem in the L cabinet
- Kannan.nagaian
- Member
- Posts: 30
- Joined: 11 Apr 2010 04:06
CS-2 card bootup problem in the L cabinet
Hi
I have CS-2 in redundancy configuration in the common hardware. One CS-2 in S cabinet and it is working fine and the second card in L cabinet which does not give bootup sequence (not working) in the hyper terminal.
It is a new installation and if I insert the card in S cabinet then it is working fine. Is there any micro switch setting in the CS-2 card or anything i missed for for the CS-2 card installation in the L cabinet.
Any help would be appreciated.
Regards
Kannan
I have CS-2 in redundancy configuration in the common hardware. One CS-2 in S cabinet and it is working fine and the second card in L cabinet which does not give bootup sequence (not working) in the hyper terminal.
It is a new installation and if I insert the card in S cabinet then it is working fine. Is there any micro switch setting in the CS-2 card or anything i missed for for the CS-2 card installation in the L cabinet.
Any help would be appreciated.
Regards
Kannan
- Kannan.nagaian
- Member
- Posts: 30
- Joined: 11 Apr 2010 04:06
- Kannan.nagaian
- Member
- Posts: 30
- Joined: 11 Apr 2010 04:06
- Kannan.nagaian
- Member
- Posts: 30
- Joined: 11 Apr 2010 04:06
- Kannan.nagaian
- Member
- Posts: 30
- Joined: 11 Apr 2010 04:06