OXE CPU switch-over

Post Reply
Posts: 1
Joined: 11 Jul 2018 10:28

OXE CPU switch-over

Post by gilcsr » 11 Jul 2018 11:00

just a question...
is it normal that during a cpu switch-over (bascul main xa to xb) all the DECT communications are lost ?
only the IP or Analogic communications are maintained
the redundancy is ok
sorry for my english...
thanks for your answers

oxe R10.1.1-j2.603-29-b-fr-c0

User avatar
Posts: 207
Joined: 27 May 2010 03:23
Location: Riyadh, Saudi Arabia

Re: OXE CPU switch-over

Post by mustafa.ahmad » 16 Jul 2018 08:49

No, it is not normal, all the communications must be as they are, only the calls that are being placed or in routing mode get disconnected. Calls already established must remain as in their state before bascul.

Maybe there is bug in the patch.

Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 3431
Joined: 23 Sep 2004 06:47
Location: Russia

Re: OXE CPU switch-over

Post by vad » 16 Jul 2018 23:19

I think - your DECT sinchronized from CPU. And in this case during switch-over - DECT network reinitalized and all communication lost (the same problem can be with ABC-F calls)

Post Reply

Return to “System”