Hello all,
I'm trying to make a connection between an alcatel oxe pabx and asterisk via ISDN and a Patton gateway trough a formerly used isdn breakout. I searched on this forum, and already read some good manuals and posts, but at this moment i'm stuck on this...
Main goal is to make internal calls between oxe and asterisk and make public calls with the asterisk over the oxe.
On the oxe there are currently 2 trunks, 1 PRA-30 (main trunk) and a second trunk (the trunk currently in use to make the link between the two pabx'es with the patton)
The patton and the asterisk are already configured,. I can set up a call from asterisk to all alcatel phones, that works fine. When i try to make an external call, the call goes to a internal nummer on the alcatel pabx.
Another thing that isn't working is call internally from alcatel to asterisk phones. I tried to make a second prefix and routing, but i don't really get it how this works. (i'm not an alcatel specialist and work with omnivista to configure everything)
Does somebody have experience or a good manual to make this setup working? Most information here handles about a sip trunk between oxe and asterisk.
Thanks for the feedback!