4XX8EE Phones with Asterisk

Posts: 3
Joined: 31 Mar 2021 15:19

Re: 4XX8EE Phones with Asterisk

Post by DiGiNeX »

cwsonline wrote: 12 May 2011 10:02 1. PC ethernet configured as with tftp server and binaries.
2. Crossed ethernet cable from phone to PC.
3. Power on phone. Hold i+1+2+3. Release when keys light.
4. After several seconds you will be able to ping the phone at
5. Telnet to phone.
6. >dwl go sipc

Phone will then attempt to download the sip binaries. You could also use just 'dwl go' and it will attempt to download all the binaries.
One question.

Since my 4018EE is powered by PoE (and I don't have a power adapter), should I connect the PC to the PC port and use the LAN port for the PoE Switch?
Posts: 6
Joined: 29 May 2014 05:13

Re: 4XX8EE Phones with Asterisk

Post by nomadewolf »

Hi everyone!

I've managed to get the phones working, except for two things:
-Missed calls history/warning

I've read someone here managed to get - at least the missed calls - working, but i can't figure out what exactly enabled it...

Does anyone know the specific way to enable it?

Posts: 6
Joined: 29 May 2014 05:13

Re: 4XX8EE Phones with Asterisk

Post by nomadewolf »

MM-P wrote: 03 Jun 2012 14:50 You´ll find in the attachment the latest firmware for the 4008 and 4018 phones.

Now MWI, Voicemail and missed calls are working.
How did you got missed calls working?
I got the 2.01.10 SIP version files and missed calls do not work.
Or is it something about the config files? Or is it in Asterisk itself?

Posts: 1
Joined: 03 Jun 2021 12:36

Re: 4XX8EE Phones with Asterisk

Post by kentavr5 »

Dear All,

I have 4018 with NOE 3.92.20. I have read all the pages on this forum trying to switch it from NOE to SIP. Is there anyone here with NOE ver less than 4 who succeeded in bringing their devices to work with Asterisk server? Is it possible at all?
When I hard reset "i+1+2+3", and telnet with "dwl go", the unit connects to TFTP and tries to download 6 files - noe4018 & noe4018-header, data4018 & data4018-header, bin4018 and bin4018-header. I does NOT try downloading the files that are needed - noesip4018 and datasip4018.
If I restart the unit and press (during the 2 stage) i and #, the unit downloads lanpbx.cfg and that is all.
So is there anything that could be done for my 4018 to work with Asterisk? Any help or guidance is highly appreciated. Thanks!
Post Reply

Return to “Asterisk”